Solid State Logic SSL 18 handleiding
Handleiding
Je bekijkt pagina 14 van 54
The master output levels are set by the HP A and HP B controls on the front panel.
SSL 360° allows you to configure the output power of HP A and HP B to best suit different headphone impedances. See the SSL 360°
SSL 18 Mixer section for more information.
14. POWER
The power button toggles power on/off to the unit.
SSL 18 Rear Panel Controls
1. POWER
IEC Power Inlet.
2. WORD CLOCK OUT
Wordclock Out 75 Ohm BNC Connection.
3. USB
USB 'C' Type Connector - connect SSL 18 to your computer using the included USB cable.
4. MIDI IN & OUT
The MIDI (TS Mini-Jack 'Type A' standard) IN & OUT allow the SSL 18 to be used as a MIDI interface. MIDI IN will receive MIDI signals
from keyboards or controllers & MIDI OUT allows MIDI information to be sent out to trigger Synths, Drum machines or any MIDI-
controllable equipment you have available.
Note: 'Type B' MIDI Jacks will not work. 'Type A' must be used.
5. COAXIAL S/PDIF I/O
A S/PDIF digital audio input and output are provided on coaxial connections and can operate at all sample rates up to and including 192
kHz.
6. OPTICAL ADAT | S/PDIF I/O
4 optical ports allow for up to 16 channels of additional digital audio inputs and outputs via ADAT at 44.1/48 kHz or 8 channels at
88.2/96 kHz.
Optical IN 2 and OUT 2 can be configured for S/PDIF I/O if your S/PDIF equipment only has optical connections and no coaxial input.
1/27/25, 9:53 AM
SSL 18 User Guide – SSL Support
https://support.solidstatelogic.com/hc/en-gb/articles/23411101112477-SSL-18-User-Guide
14/54
Bekijk gratis de handleiding van Solid State Logic SSL 18, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Solid State Logic |
| Model | SSL 18 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8982 MB |