Simrad Active Imaging HD (Thru-Hull) handleiding
Handleiding
Je bekijkt pagina 26 van 32
26
Install top of fairing block
1 While on top of the boat, pass the transducer cable through the transducer stem hole (the larger hole)
in the top part of the fairing block.
2 Apply a thin layer of sealant to the hull (A) inside the masked off area.
3 Coat the insides of the two holes in the top piece of the fairing block, and the cut face (bottom face) with
marine sealant.
A
4 Lower the top half of the fairing block over the transducer stem and anti-rotation stud. Press it gently
into position against the inside of the hull.
5 If gaps are visible around the stem and anti-rotation stud, ll them in with sealant. Then wipe away
excess sealant that oozes over the edges or top surface of the fairing block.
Bekijk gratis de handleiding van Simrad Active Imaging HD (Thru-Hull), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Simrad |
| Model | Active Imaging HD (Thru-Hull) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3264 MB |
