Sime HYBRID REVOLUTION 30 handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788/ 88

Afdrukken

Je bekijkt pagina 8 van 88

8

1.3 Start-up

1.3.1 Preliminary checks

a

WARNING

– Should it be necessary to access the areas in the

bottom part of the appliance, make sure that the

system components and pipes are not hot (risk of

burning).

– Before replenishing the heating system, put on pro

-

tective gloves.

Commis

sioning of the

HYBRID REVOLUTION 30

Hybrid Heat Pump

must be carried out by professionally qualified technicians, af-

ter which the Hybrid Heat Pump can operate automatically. It

may

, ho

wever, be necessary for the user to start the appliance

autonomously without involving a technician: for example, after

a holiday.

In this case, certain checks and the following operations must

be carried out:

– check that the gas isolation and water system valves are open.

1.3.2 Ignition

GAS SIDE (Boiler)

After having carried out the preliminary checks, perform the

following to start the appliance:

– set the main system switch to "ON" in order for the display to

show the pressure level in the system during refilling

–

make sure that the operating mode is set to "Stand-by";

if this is

not the case, press the button

y

until "Stand-by" mode has

been selected

ON

Fig. 3

– on the display (1), check that the heating system pressure

when cold is

1-1.2 bar

. If this is not the case, open the filling

valve (2) and restore the heating system pressure until the

display (1) shows a reading of

1-1.2 bar

– close the filling valve (2)

2

1

Fig. 4

– select the "SUMMER"

l

operating mode by pressing and

holding the

y

button for at least 1 second. the value of the

delivery sensor detected at that moment will appear on the

display

– open one or more than one hot water tap. The boiler will work

at maximum power until the taps are closed.

GAS SIDE (BOILER) "WINTER MODE" SETTING

Once the boiler has been commissioned in "SUMMER mode"

l

"WINTER mode"

n

can be selected by pressing and hold-

ing the button

y

for at least 1 second. The value of the de-

livery water temperature detected at that moment will appear

on the display. In this c

ase it is necessary to adjust the room

thermostat/s to the required temperature or if the system has

a chrono-thermostat, check that this is "active" and adjusted.

SETTING "WINTER MODE" REMOTE CONTROL SIDE

– From the

“Main screen”

press the

@

button to enter the menu

selection screen and use the

[

and

]

buttons to select the

“Mode” function

– press the

@

button to confirm the selection

12:12

Mon 25 Oct 2024

Mode [...]

Zones [...]

Menu [...]

Wi [...]

Fig. 5

– use the

[

and

]

buttons to select the

“System” menu

and

press the

@

to enter the editable area

12:12

Mode

Hot DHW water Man 50 °C

Plant Heang

Silent funcon [...]

Fig. 6

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788/ 88

Bekijk gratis de handleiding van Sime HYBRID REVOLUTION 30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Sime (Niet gecategoriseerd)

Handleiding bekijken

Sime Murelle Equipe 220 BOX ErP

Niet gecategoriseerd - handleiding

Handleiding bekijken

Sime Murelle Equipe 100 550 BOX

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd