Silvercrest SHS 12 B2 handleiding
Handleiding
Je bekijkt pagina 12 van 60
SilverCrest SHS 12 B2
10 - English
Insert the USB-C plug of the charging cable (3) into the wall bracket (4) as shown in the
illustrations below.
Use the wall bracket (4) to mark the drill holes.
Drill the holes to fit 6 mm rawlplugs.
Insert the rawlplugs (6) into the drill holes.
Use the screws (5) to screw the wall bracket (4) in place with the USB-C connector facing
upwards.
Connect the USB-A plug of the charging cable (3) to a free USB port on a USB power adapter
(not included).
8. Getting started
8.1 Charging the battery
CAUTION! Due to the high power consumption, do not charge the hand-held
hoover using a laptop/computer, always use a USB power adapter with protection
class II / (5 V , min. 2 A) which is approved for household appliances.
Switch the hand-held hoover off before charging it. To do this, slide the on/off switch
(9) to the 0 position.
Charge the battery for approx. 5 hours before first use.
Before first use or whenever the built-in battery is empty, charge it as follows:
Insert the hand-held hoover into the wall bracket (4) from above. The indicator light (10) flashes
red while the unit is charging.
The indicator light (10) turns green when it is fully charged.
After charging, unplug the power adapter from the mains socket to save power.
Bekijk gratis de handleiding van Silvercrest SHS 12 B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | SHS 12 B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6519 MB |
