Sigma EOX FL 150 handleiding
Handleiding
Je bekijkt pagina 9 van 80
CONNECTION
3
Headlight exclusively for connection to a DC voltage source of 12 - 16V / 12W, e.g. on an e-bike battery. Connection to an alternating voltage source
(e.g. dynamo) is not permitted! The EOX
®
FL 150 requires at least 12W nominal power.
The connection of the EOX
®
FL 150 is only permitted on vehicles in which it is ensured that electricity is still available to supply the lighting system
for at least 2 hours after the battery has been switched off due to discharge.
To connect to an e-bike battery, the internally mounted double cable (black wire = –, blue wire = +) must be used.
Do not cut off the cable completely, just shorten it to the required length.
IMPORTANT: Please press the supplied cable connectors on the at side FIRMLY together with pliers!
–
+
!
Please use the cable
connection set* that
is compatible with
your drive.
CAUTION
ENGINE
!
2-way
connector
* Not included
in delivery
Switching the EOX
®
FL 150
on and off via the display
or the switch on the e-bike
(if the system offers this option).
The EOX
®
FL 150 does not
have its own switch.
USB-C charging port
For charging electrical devices such as smartphones,
bike computers, etc. Please note the maximum output
current of 2A.
ATTENTION: When the cover is open, the light is NOT
protected against water ingress at this point!
Bekijk gratis de handleiding van Sigma EOX FL 150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sigma |
| Model | EOX FL 150 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 9101 MB |
