Sigma EOX FL 150 handleiding
Handleiding
Je bekijkt pagina 7 van 80
GENERAL ASSEMBLY INSTRUCTIONS
1
Make sure that the EOX
®
FL 150 is properly installed and aligned. For headlights with a separate re ector , ensure that it is aligned perpendicular
to the road. On a completely at road, the horizontal light edge must always be visible on the road!
The required installation height for headlights and re ectors in Germany is between 400 and 1200 mm. Further information can be found in the StVZO.
If necessary, you can also contact a bicycle retailer in your area. Make sure that the EOX
®
FL 150 is positioned and aligned so that oncoming traf c is
not blinded.
WARNING! To avoid falls, accidents and serious injuries, only use one
of the brackets supplied (handlebar or fork).
NOTE: Never mount brackets on saddle rails!
NOTE: Never mount brackets on conical components!
WARNING! Do not use the bicycle if the light beam of your EOX
®
FL 150
is misaligned or if the EOX
®
FL 150 is too loose.
Only adjust or lock the EOX
®
FL 150 when the bike is stationary. Blinding oncoming traf c
can lead to accidents. Before aligning the EOX
®
FL 150, rst loosen the screw on the bracket.
Make sure that this screw is then tightened again so that neither the screw nor the headlight
can come loose or move on their own.
!
2
1
3
1
2
3
Bekijk gratis de handleiding van Sigma EOX FL 150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sigma |
| Model | EOX FL 150 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 9101 MB |
