Showtec Titan FLEX FX Controller handleiding

Verlichting

Showtec

52 pagina's

PDF beschikbaar

Handleiding

6.6.7.1. Patch

In this submenu you can patch pods to the 8 pod connectors OUT (14) on the controller.

01) Press the UP/DOWN buttons to select one of the options:01)

• Default: Select the default patch settings (Yes/No). The default patch settings are•

Output 1 = Pod 1, Output 2 = Pod 2, etc.

• Output 1–8 (see 6.6.7.1.1. Output 1–8)•

02) Press the SET button to confirm the selection.02)

Note:

The numbering of the pods in the DMX chart corresponds to the default settings. If you patch the pods in a

different way (see 6.6.7.1.1. Output 1–8), controlling Pod 1 via DMX means controlling Output 1 of the controller

and the respective pod patched to it.

6.6.7.1.1. Output 1–8

In this submenu you can manually patch the pods to the 8 pod connectors OUT (14) on the controller.

01) Press the UP/DOWN buttons to select one of the 8 outputs (Output 1–8).01)

02) Press the SET button to confirm the selection and open the submenu.02)

03) Press the UP/DOWN buttons to select one of the 8 pods (Pod 1–8).03)

04) Press the SET button to confirm the selection.04)

6.6.7.2. Curves Select

In this submenu you can set dimming curves.

01)

Press the UP/DOWN buttons to select one of the 4 options:

01)

•

Linear

•

Square Law

•

Inv. Square law

•

S-type

•

02)

Press the SET button to confirm the selection.

02)

Product code: 40306

Controller for Titan Strobe FLEX FX

Bekijk gratis de handleiding van Showtec Titan FLEX FX Controller, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.