Showtec Titan FLEX FX Controller handleiding

Verlichting

Showtec

52 pagina's

PDF beschikbaar

Handleiding

Figure 14

6.6.7.3. Display Invert

In this submenu you can set the orientation of the OLED display.

Press the UP/DOWN buttons to select one of the 2 options:

• Normal: Normal orientation of the OLED display•

• Inverted: The OLED display is rotated at 180°•

Note:

If the display is rotated at 180°, the function of the buttons on the control panel remains the same.

6.6.7.4. DMX Fail

In this submenu you can set the behavior of the device in case of a DMX failure.

01) Press the UP/DOWN buttons to select one of the 4 options:01)

• Off: The device blacks out the light output•

• Hold: The device uses the last DMX signal correctly received•

• Manual: The device uses the values selected in manual mode•

• Program: The device uses the last used built-in program•

02) Press the SET button to confirm the selection.02)

6.6.7.5. Fan Mode

In this submenu you can set the speed of the fans of the 8 pods.

01) Press the UP/DOWN buttons to select one of the 3 options:01)

• Auto•

• High•

• Off•

02) Press the SET button to confirm the selection.02)

Note:

You cannot change the settings of the PSU fan of the controller.

Product code: 40306

Controller for Titan Strobe FLEX FX

Bekijk gratis de handleiding van Showtec Titan FLEX FX Controller, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.