Showtec Sonus Bar 4B handleiding
Handleiding
Je bekijkt pagina 17 van 44
5.2.5. DMX Addressing
In a setup with multiple devices, make sure that you set the DMX starting address of each device correctly. The
Sonus Bar 4B has 7 personalities: RGBW (4 channels), Pixel (16 channels), Basic (6 channels), Extended (18
channels), Auto (6 channels), Basic Auto (10 channels), Extended Auto (22 channels).
If you want to connect multiple devices on one data link and use them in 22-channel mode, for example,
follow the steps below:
01) Set the starting address of the 1
st
device on the data link to 1 (001).01)
02)
Set the starting address of the 2
nd
device on the data link to 23 (023), as 1 + 22 = 23.
02)
03)
Set the starting address of the 3
rd
device on the data link to 45 (045), as 23 + 22 = 45.
03)
04)
Continue assigning the starting addresses of the remaining devices by adding each time 22 to the previous
04)
number.
When addressing multiple devices on one data link, make sure that there are no overlapping channels. You
cannot control devices individually if they have overlapping channels.
16
c
Product code: 41275
Sonus Bar 4B
Bekijk gratis de handleiding van Showtec Sonus Bar 4B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Sonus Bar 4B |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4374 MB |
