Showtec Performer Fresnel 2200 DDT handleiding

Verlichting

Showtec

40 pagina's

PDF beschikbaar

Handleiding

4.5. Connecting to Power Supply

DANGER

Electric shock caused by short-circuit

The device accepts AC mains power at 100–240 V and 50/60 Hz. Do not supply power at any other voltage or

frequency to the device.

This device falls under IEC protection class I. Make sure that the device is always electrically connected to the

ground (earth).

Before connecting the device to the socket-outlet:

•

Make sure that the power supply matches the input voltage specified on the information label on the

•

device.

•

Make sure that the socket-outlet has ground (earth) connection.

•

Connect the device to the socket-outlet with the power plug.

4.6.

Connecting to a Dimmer Pack

You can connect the device to a standard dimmer pack.

When connecting devices to a dimmer pack, make sure that:

• the total load per output does not exceed the maximum wattage and current of the dimmer pack.•

• the total load of all connected fixtures and the dimmer pack does not exceed the maximum limit.•

Note:

The values depend on the dimmer pack you use. Refer to the manual of the dimmer pack.

Figure 6

Product code: 33045

Performer Fresnel 2200 DDT

Bekijk gratis de handleiding van Showtec Performer Fresnel 2200 DDT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.