Showtec Compact Par 18 Q4 handleiding
Handleiding
Je bekijkt pagina 9 van 28
8
Ordercode: 42589
Compact Par 18 Q4
Backside
Fig. 02
04) Clamp for Filterframe
05) LCD display + menu buttons
06) Pro-power connector OUT 100–240 V, 7A, 50/60 Hz (Gray)
07) Pro-power connector IN 100–240 V, 7A, 50/60 Hz (Blue)
08) Fuse T2A/250V
09) 5-pin DMX signal connector OUT
10) Safety Eye
11) 5-pin DMX signal connector IN
12) 3-pin DMX signal connector OUT
13) 3-pin DMX signal connector IN
14) Built-in Microphone
Installation
Remove all packing materials from the Compact Par 18 Q4. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Bekijk gratis de handleiding van Showtec Compact Par 18 Q4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Compact Par 18 Q4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4013 MB |
