Handleiding
Je bekijkt pagina 30 van 46
English−30
Menu Items
ECO INFORMATION
ECO INFORMATION Menu
CARBON SAVINGS Displays the estimated carbon savings information in kg.
CARBON USAGE Displays the estimated carbon usage information in kg. This is an arithmetic estimation, not actual
measurement value.
COST SAVINGS Displays the electricity cost savings in balance.
CARBON CONVERT SETTING Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting is based on the
OECD data (2008 Edition).
CURRENCY SETTING Displays electricity pricing in 6 currency units.
CURRENCY CONVERT
SETTING
Displays electricity savings in kW/hour (US Currency is default).
TIP: The initial setting is US Dollar [$] in [CURRENCY SETTING] and $ [0.11] in [CURRENCY
CONVERT SETTING].
This setting can be changed by using the [ECO INFORMATION] menu.
If you want to use the French setting, please refer to the steps below:
1. Touch the MENU/EXIT key and select the [ECO INFORMATION] menu using the or key.
2. Select the [CURRENCY SETTING] item by touching the or key.
3. The French currency unit is Euro [€]*. You can adjust currency setting to Euro icon [€] from
US Dollar [$] by touching the or key in [CURRENCY SETTING] item.
4. Select [CURRENCY CONVERT SETTING] by touching the or key.
5. Adjust [CURRENCY CONVERT SETTING] by touching the or key.
* This initial Euro [€] setting is based on the OECD data for Germany (2007 Edition).
Please check the receipt of electricity prices for France or OECD data for France.
The French value according to the OECD data (2007 Edition) was €0.12. €
INFORMATION
INFORMATION Menu
INFORMATION Provides information about the current input signal, the model, serial numbers of your monitor.
nOSD Warning
OSD warning messages close by touching the MENU/EXIT key.
NO SIGNAL: This function gives a warning when there is no horizontal or vertical sync. After power is turned on or when there
is a change of input signal, the “NO SIGNAL” window will appear.
OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned
on, or there is a change of input signal, or if the video signal doesn’t have proper timing, the “OUT OF RANGE” message will
appear.
Bekijk gratis de handleiding van Sharp MultiSync EA241F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | MultiSync EA241F |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4378 MB |
