Handleiding
Je bekijkt pagina 29 van 46
English−29
Menu Items
MENU TOOLS Menu
SIGNAL INFORMATION
ON If you select [ON], the monitor displays “VIDEO INPUT” after changing the input.
TIP: The compliance marks that are shown when powering on the monitor the rst time are not shown
when switching inputs.
The compliance marks are not shown again unless the AC power cord has been disconnected at
the power off status and reconnected.
OFF If you select [OFF], the monitor does not display “VIDEO INPUT” after changing the input.
TIP: Setting [OFF] also prevents the compliance marks from being shown when powering on the monitor.
SENSOR INFORMATION
ON If you select [ON], the monitor displays a “HUMAN SENSOR ON” message.
OFF If you select [OFF], the monitor doesn’t display the “HUMAN SENSOR ON” message.
KEY GUIDE If you select [ON], the Key Guide appears on screen when the OSD menu is accessed.
DATA COPY To initiate data copy from the master monitor to the sub-monitor(s), select [DATA COPY] and touch the
INPUT/SELECT key. A “PROCEEDING...” indicator will appear on the screen.
TIP: This function is only intended for the master monitor in ControlSync.
All of the settings specied in the ControlSync chart (see page 34) will be copied from the master
monitor to the sub monitor(s).
CUSTOMIZE SETTING Store the current settings for easy recovery.
To store current settings: Open the OSD menu, select [CUSTOMIZE SETTING], then touch the INPUT/
SELECT key. Touch the ECO/RESET key, the current settings are stored.
To restore settings: Touch the MENU/EXIT key for 3 seconds or more when the OSD menu is closed.
MULTI DISPLAY
MULTI DISPLAY Menu
MONITOR NO. This function is for [INDIVIDUAL ADJUST].
Sets the monitor number for each monitor.
Control a sub-monitor from the master monitor by [INDIVIDUAL ADJUST]:
This function is for controlling a sub-monitor from the master monitor. It is useful if the sub-monitor is
located at an unreachable spot.
Please set the monitor number for each monitor. If you set a unique number to each of the monitors, you
can control a specic monitor. If you set duplicate numbers to some of the monitors, you can control the
monitors that have the same number simultaneously.
TIP: A master monitor should be connected only with ControlSync OUT. Do not connect a master
monitor with ControlSync IN. See ControlSync for information about master and sub-
monitors (page 33).
TARGET MONITOR NO. Controls a sub-monitor’s OSD by using the master monitor’s control keys.
Sets the sub-monitor number that is set at [MONITOR NO.]. By touching the INPUT/SELECT key, each
sub-monitor displays its monitor number.
INDIVIDUAL ADJUST
ON Controls an individual sub-monitor from the master monitor.
Once [ON] is set, operation at the master monitor reects to the sub-monitor OSD.
To disable [INDIVIDUAL ADJUST], please touch the INPUT and MENU keys simultaneously.
TIP: Please connect monitors with the ControlSync cables.
Bekijk gratis de handleiding van Sharp MultiSync EA241F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | MultiSync EA241F |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4378 MB |
