Handleiding
Je bekijkt pagina 6 van 9
6
TM
USER MANUAL
REFRIGERATED DROP-IN WELLS
OPERATING INSTRUCTIONS
(CONTINUED)
Cleaning the Interior of Unit
• When cleaning the cabinet interior, use a solvent of warm water and mild soap.
• Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the interior finish.
• Periodically remove the shelves and shelf brackets from the unit, and clean them with a mild soap and warm water.
INSTALLATION INSTRUCTIONS
PLEASE READ THIS MANUAL THOROUGHLY PRIOR TO EQUIPMENT SETUP, OPERATION, AND MAINTENANCE.
THIS UNIT IS INTENDED FOR USE IN A TEMPERATURE-CONTROLLED ENVIRONMENT LESS THAN 75º F AND 55% RELATIVE HUMIDITY.
MALFUNCTION DUE TO IMPROPER CONDITIONS IS NOT COVERED UNDER WARRANTY.
IMPORTANT — Please Read Before Installation:
• If the unit has recently been transported on its side, please let the unit stand upright for a minimum of 24 hours before
plugging it in.
• Make sure all accessories are installed (shelves, shelf clips, etc.) before plugging in the unit.
• Make sure the unit has reached the desired temperature before loading the unit with products.
• Do not attempt to remove or repair any component of the unit. Consult an authorized service technician for
servicing / repair.
• Do not stand inside the unit.
• Please read through this manual in its entirety.
Cabinet Location Guidelines:
• Install the unit on a strong and leveled surface.
− If the surface is uneven, the unit may be noisy.
− The unit may malfunction if the surface is uneven.
• Install the unit in an indoor, well-ventilated area.
− For best performance and to maintain proper airflow, maintain 6” of clearance on the side and the back of the
unit at all times.
− If installed in a cabinet, there must be venting for the unit.
− Outdoor use may cause decreased efficiency and damage to the unit.
− Avoid direct sunlight.
• Avoid installation in a high humidity and / or dusty area.
− High humidity can cause the unit to rust and may decrease efficiency.
− Dust collected on the condenser coil may cause unit to malfunction.
− Malfunction due to high ambient temperatures, humidity, or improperly maintained condenser coil will
void the warranty.
• Select a location away from heat and moisture-generating equipment.
− High ambient temperatures may cause the compressor to malfunction.
− Malfunction due to high ambient temperatures and humidity will void the warranty.
Bekijk gratis de handleiding van ServIt 423SDC5A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ServIt |
| Model | 423SDC5A |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1024 MB |
