Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 64 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 64 of 124
9.10 Recording an audio manually
The Audio function allows the sound signal from the sound level meter transduction chain to be rec-
orded at the same time as the measurement parameters. The signal thus recorded can be used for re-
play by means of an audio playback program or through the NS-ENS software module. The instru-
ment allows recording to be triggered either manually or automatically through user-settable trigger
functions. Manual and automatic modes can also be used in conjunction during a measurement.
Info
To setup the instrument correctly, please refer to the chapter “10.3 Setting audio re-
cording parameters” on page 69.
Notice!
With this function, audio recording and measurement recording are carried out simul-
taneously.
1
Start a measurement with recording, see chapter “9.9 Starting
and stopping a measurement with datalogging ” on page 63.
2
The measurement with recording is running (see the red circle
recording icon in the upper right corner).
3
Tap the "audio" icon on the left to start an audio recording.
4
The audio recording icon turns green when audio recording is
active. The icon in the upper right corner indicates the status of
audio recording.
5
Tap the "audio" icon again to stop audio recording.
6
Tap the right icon to stop recording the measurement.
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
