Senseca XPT800 handleiding
Handleiding
Je bekijkt pagina 36 van 124
XPT800 – Sound Level Meter and Spectrum Analyzer
V1.0
Page 36 of 124
5.5.2 Charging the battery
Notice!
Use only a USB-C type cable paired with a standard cell phone power supply with the fea-
tures listed below and suitable for mains power supply.
Characteristics of the battery (supplied)
Type
Rechargeable battery pack
Li-Ion polymer
Protection
PCM circuit for battery cell protection, temperature protection
Capacity
9000 mA (3.7 V)
Operating time
>24 h
Charge time
8-12 h depending on the charger used
Operating temperature
Charging 0…+45 °C, discharging -20…+60 °C
Battery life cycles
> 500 complete discharge and recharge cycles with 80% initial capaci-
ty remaining
Power supply (not supplied)
Output
5 Vdc / 2.1 Ah / 10.5 W
When the instrument is charging, the battery charge indicator has the orange-colored icon background.
If connected to PC via USB, the charging current is limited to max 500 mA. If connected to battery
charger, with instrument on and low power mode, charging current exceeds 1 Ah recharging batteries
in less time. Successful charging is indicated by LED in the center button.
Fig. 13 - Battery Charging
1
Connect the USB-C cable to the power supply and USB-C connector on the instrument.
2
Plug the power supply into a compatible electrical outlet.
3
When 100% charge is reached, remove the power supply and USB-C cable from the instrument.
Warning!
Do not leave the instrument on charge for longer than necessary, as soon as 100% charge
is reached remove the power supply, this is to avoid overheating the battery and com-
promising battery life.
Bekijk gratis de handleiding van Senseca XPT800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | XPT800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27123 MB |
