Senseca PRO 915-2 handleiding
Handleiding
Je bekijkt pagina 15 van 30
PRO 915-2 – Differential manometer / Thermometer
Page 15 of 30
6.1 Menu structure
The menu structure is shown below; each item is preceded by the level according to the bar
symbology shown on the display.
MENU
DESCRIPTION
‒ Measures list
Selection of the quantities to display and log
‒ Recording
= Start recording
Logging start
= Set interval
Setting of logging interval: 1/2/5/10/15/30 s, 1/2/5/10/15/30 min, 1 h
‒ Chart setup
Setting of the measurement graphical display
= Channel select
Selection of parameters to be displayed graphically (up to 3 parameters,
selectable from those enabled in the "Measures list" menu)
= Chart interval
Chart measurement interval: 1/2/5/10/15/30 s, 1/2/5/10 min
‒ USB mode
Configurable between COM interface (for logging and serial communica-
tion) or Mass storage (for viewing logging files from PC)
‒ Alarm settings
Type of alarm signaling: Off, acoustical (buzzer) and/or optical (flashing
backlight and red flashing status LED)
‒ Settings
= Device info
Displaying of instrument info (model, S/N, FW revision, …)
= Backlight
Backlight configuration
≡ BL activation
Backlight duration: Off, 5 s, 30 s, 1 min, always On
≡ BL intensity
Backlight intensity: Low, Medium, High
= Auto-off
Auto-off setting: Off, 30 min, 1/2/4/6/12 h
= Date & time
Setting of date and time (yyyy-mm-dd hh:mm:ss)
= Time zone
UTC or CET time zone setting
= Language
Selection of the menu language
= Dark mode
Black background enabling/disabling
= Factory reset
Reset to factory settings
‒ Thermocouple
Temperature measurement settings
= Measures units
Setting of the unit of measurement: °C, °F, K
= Alerting
Alarm thresholds enabling/disabling
= Min. alarm
(*)
Lower alarm threshold (alarm if measure < threshold)
= Max. alarm
(*)
Upper alarm threshold (alarm if measure > threshold)
= Hysteresis
(*)
Thresholds hysteresis
= Correction
Temperature measurement adjustment
≡ Zero point
Offset adjustment
≡ Gradient
Slope adjustment
≡ Surface
Setting of correction factor for contact probes
= Probe info
Information on the probe
Bekijk gratis de handleiding van Senseca PRO 915-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | PRO 915-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6427 MB |
