Senseca PRO 915-2 handleiding
Handleiding
Je bekijkt pagina 16 van 30
PRO 915-2 – Differential manometer / Thermometer
Page 16 of 30
MENU
DESCRIPTION
‒ Pressure sensor
Pressure measurement settings
= Measures units
Setting of the unit of measurement: Pa, hPa, kPa, bar, mbar, inHg, mmHg,
inH
2
O, mmH
2
O
= Alerting
Alarm thresholds enabling/disabling
= Min. alarm
(*)
Lower alarm threshold (alarm if measure < threshold)
= Max. alarm
(*)
Upper alarm threshold (alarm if measure > threshold)
= Hysteresis
(*)
Thresholds hysteresis
= Correction
Pressure measurement adjustment
≡ Zero point
Offset adjustment
≡ Gradient
Slope adjustment
= Probe info
Information on the sensor
‒ Velocity
Velocity measurement settings
= Measures units
Setting of the unit of measurement: m/s, km/h, mph, knot
= Air pressure
Setting of barometric pressure for velocity calculation
= Pitot coefficient
Coefficient of the pitot tube used
= Alerting
Alarm thresholds enabling/disabling
= Min. alarm
(*)
Lower alarm threshold (alarm if measure < threshold)
= Max. alarm
(*)
Upper alarm threshold (alarm if measure > threshold)
= Hysteresis
(*)
Thresholds hysteresis
= Cross section
Duct cross-sectional area for flow rate calculation
(*)
The item does not appear if "Alerting" is set to "Off"; to display the item, first select a meas-
ure/channel to associate the alarm with.
To go back up one level within the menu, press the key. The MENU key allows exiting the
menu directly and return to measurement mode from any level (except from parameter set-
ting screens, from which you can exit only with ).
6.2 Configuring a parameter
Configuring a parameter may require choosing an option from those proposed, or setting a
numerical value.
Configuring a parameter by choosing an option from those proposed:
The current setting is marked by the check mark. To change it, choose an option with the
down/up arrow keys, then press OK to confirm.
Pressing the key it is possible to exit by canceling changes not yet confirmed.
Bekijk gratis de handleiding van Senseca PRO 915-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | PRO 915-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6427 MB |
