Senal CS-88 handleiding

Handleiding

123456789101112/ 12

Afdrukken

Je bekijkt pagina 8 van 12

8

Using the Three-Level Gain Switch

The three-level gain switch provides a +10 dB boost or -10 dB pad. Boosting the microphone’s gain can

be useful for picking up low-level or distant sounds in a quiet environment. To boost the microphone’s

gain by 10 dB, slide the three-level gain switch so it rests under the +10 dB marking.

The -10 dB pad lowers the level of the incoming signal and is useful for preventing distortion when

recording in high-decibel environments, like a rock concert. To use the 10 dB pad, slide the switch so it

rests above the -10 dB marking.

To return the microphone’s gain to normal, slide the switch so it rests at the middle 0 dB marking.

The Windscreen

The CS-88 comes with a foam windscreen that helps reduce wind noise. To fit the windscreen onto the

microphone, rotate the windscreen while gently pushing it onto the microphone barrel. Make sure that

the windscreen covers all the ports on the sides of the microphone barrel.

Replacing the Shock Mount Suspenders

The CS-88’s integrated shock mount isolates the microphone from your camera or boom pole. This

helps prevent the microphone from picking up vibrations in the camera or the boom, which can cause

disruptive and unwanted noise in your recording.

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪

Using the Three-Level Gain Switch / The Windscreen / Replacing the Shock Mount Suspenders

123456789101112/ 12

Bekijk gratis de handleiding van Senal CS-88, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd