Senal CS-88 handleiding

Handleiding

123456789101112/ 12

Afdrukken

Je bekijkt pagina 9 van 12

9

The CS-88 comes with replacement suspenders for the integrated shock mount. To replace the

suspenders, follow these steps:

1. Unhook the two rear suspenders from the microphone, and then unhook the two front suspenders

from the microphone.

2. Remove the microphone and the old suspenders from

the shock mount.

3. Hook the new suspenders onto the suspender hooks

inside the shock mount.

4. Make sure the microphone and the shock mount are

facing the same direction, and position the microphone

inside the shock mount.

Note: The Senal logo is at the front of the shock mount.

5. Hook the front suspenders onto the front suspender hooks of the microphone, and then hook the

rear suspenders onto the rear suspender hooks of the microphone.

Replacing the Shock Mount Suspenders

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪

OFF

ON

-10dB

+10dB

0

123456789101112/ 12

Bekijk gratis de handleiding van Senal CS-88, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd