Sealer Sales HL-M1120LD handleiding
Handleiding
Je bekijkt pagina 27 van 62
HL- M1120LD INSTRUCTION MANUAL(UPDATED: 2/27/24)
22
lowest setting (or counterclockwise). If you want to print on the right side of the bag, turn the
coding seat to a higher setting (or clockwise).
Printing Optimization
1. Print quality will be determined by the degree of ink melting, distance between the ink roller and
printing wheel and distance between the silicone wheel and printing wheel.
2. Over time, decrease the gap between the ink roller and printing wheel.
3. A newer ink roller will require a lower temperature vs. an older ink roller. Make adjustments to ink
temperature as necessary.
4. Ensure there is adequate pressure on the silicone wheel (Part #BS-57A) by the printing wheel. We
suggest using factory default settings before making any adjustments. Adjustments may be needed
based on material thickness.
5. If the printing wheel rotates and there is no thermoplastic material running through the band sealer,
excess ink will rub off on the silicone wheel. Clean the silicone wheel with a shop cloth and silicone
spray to remove any excess ink.
6.
Remove the ink roller from unit until sealer is ready for use. If ink roller is left in the
machine while not in use, this may result in melting of the ink roller and messy print. To
clean, wipe down belts, silicone wheel, and other parts with silicone spray and cloth.
Bekijk gratis de handleiding van Sealer Sales HL-M1120LD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | HL-M1120LD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15685 MB |
