Sealer Sales HL-M1120LD handleiding
Handleiding
Je bekijkt pagina 28 van 62
HL- M1120LD INSTRUCTION MANUAL(UPDATED: 2/27/24)
23
Maintenance
The following maintenance procedures should be followed to ensure the longevity of your HL-M1120LD
band sealer.
Inspection and Cleaning
1. Inspect your machine daily.
2. Check if there is any foreign matter or dirt adhering to the band sealer.
3. To clean your band sealer, wipe down your sealer with silicone spray and a shop cloth. Do not
apply silicone directly to your sealer. Definitely DO NOT wash down your machine with water.
Sealing and Drive Belts
1. Check and replace the belts as necessary. Both the sealing and drive belts
are consumable items. Replace sealing belts when there are burn marks or if the
belts become hard and brittle. Replace drive belts when the belts break or
become badly cracked.
2. To change out the belts, make sure the machine is turned off.
3. Remove the safety cover.
4. Remove the drive belts.
5. To remove the sealing belts, push on the adjustment blocks (Figure 34, Item #30) and the sealing
belts should easily slip off.
6. Put new sealing and/or drive belts back on the machine. Test the machine, making adjustments as
necessary.
7. Replace the safety cover.
8. Check our YouTube channel (https://www.youtube.com/user/sealersales) for video demo.
Scan QR Code for
Video Demo
Bekijk gratis de handleiding van Sealer Sales HL-M1120LD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | HL-M1120LD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15685 MB |
