Sealer Sales CBS-880II handleiding
Handleiding
Je bekijkt pagina 22 van 56
CBS- 880 INSTRUCTION MANUAL
18
3. Adjust the pressure knob Figure 11 to change the pattern of the embossing wheel on your band sealer.
Figure 11. Adjusting the embossing wheel
4. If the sealing belt is running off the guide wheels, make adjustments to the screws that are found on the
driven wheel set. See Figure 12.
Figure 12. Adjusting sealing belts
5. To shut down, turn off the heater switch and allow the temperature of the machine to drop before turning
off the power and fan switches. Following the shut down procedure will significantly prolong the life of machine and
sealing belts.
To align the sealing belts, rotate the upper screw clockwise
to move the sealing belt out and rotate the below screw
clockwise to move the sealing belt in.
Bekijk gratis de handleiding van Sealer Sales CBS-880II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | CBS-880II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18334 MB |
