Schneider VW3A3725 handleiding
Handleiding
Je bekijkt pagina 7 van 96
QGH66984 07/2020 7
This equipment has been designed to operate outside of any hazardous location. Only install this
equipment in zones known to be free of a hazardous atmosphere.
Your application consists of a whole range of different interrelated mechanical, electrical, and electronic
components, the drive being just one part of the application. The drive by itself is neither intended to nor
capable of providing the entire functionality to meet all safety-related requirements that apply to your
application. Depending on the application and the corresponding risk assessment to be conducted by you,
a whole variety of additional equipment is required such as, but not limited to, external encoders, external
brakes, external monitoring devices, guards, etc.
As a designer/manufacturer of machines, you must be familiar with and observe all standards that apply
to your machine. You must conduct a risk assessment and determine the appropriate Performance Level
(PL) and/or Safety Integrity Level (SIL) and design and build your machine in compliance with all applicable
standards. In doing so, you must consider the interrelation of all components of the machine. In addition,
you must provide instructions for use that enable the user of your machine to perform any type of work on
and with the machine such as operation and maintenance in a safe manner.
The present document assumes that you are fully aware of all normative standards and requirements that
apply to your application. Since the drive cannot provide all safety-related functionality for your entire
application, you must ensure that the required Performance Level and/or Safety Integrity Level is reached
by installing all necessary additional equipment.
Drive systems may perform unexpected movements because of incorrect wiring, incorrect settings,
incorrect data or other errors.
DANGER
POTENTIAL FOR EXPLOSION
Install and use this equipment in non-hazardous locations only.
Failure to follow these instructions will result in death or serious injury.
WARNING
INSUFFICIENT PERFORMANCE LEVEL/SAFETY INTEGRITY LEVEL AND/OR UNINTENDED
EQUIPMENT OPERATION
Conduct a risk assessment according to EN ISO 12100 and all other standards that apply to your
application.
Use redundant components and/or control paths for all critical control functions identified in your risk
assessment.
If moving loads can result in hazards, for example, slipping or falling loads, operate the drive in closed
loop mode.
Verify that the service life of all individual components used in your application is sufficient for the
intended service life of your overall application.
Perform extensive commissioning tests for all potential error situations to verify the effectiveness of
the safety-related functions and monitoring functions implemented, for example, but not limited to,
speed monitoring by means of encoders, short circuit monitoring for all connected equipment, correct
operation of brakes and guards.
Perform extensive commissioning tests for all potential error situations to verify that the load can be
brought to a safe stop under all conditions.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
WARNING
UNANTICIPATED EQUIPMENT OPERATION
Carefully install the wiring in accordance with the EMC requirements.
Do not operate the product with unknown or unsuitable settings or data.
Perform a comprehensive commissioning test.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
Bekijk gratis de handleiding van Schneider VW3A3725, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Schneider |
| Model | VW3A3725 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9792 MB |
