Schneider HEPD80 handleiding
Handleiding
Je bekijkt pagina 2 van 24
HEPD 80 Flush Mounting Kit NHA58709
Instruction Bulletin 01/2016
© 2016 Schneider Electric USA, Inc. All Rights Reserved2
For troubleshooting, call the Surgelogic Technical Assistance Group at 1-800-577-7353.
ENGLISH
5. Using a saw or a knife, cut out an opening for the Surge Protective Device (SPD).
6. Install the four wall anchors into the marked mounting holes. (No drilling is
required).
7. Remove the knockout in the bottom of the load center that best fits the location of
the SPD. See Figure 2.
Figure 2: Remove Knockout
Figure 1: Device Preparation
Mark holes
Trace opening
3 in. (76 mm) Min.
5 in. (127 mm) Max
.
Released for Manufacturing
Printed on 2016/08/08
Bekijk gratis de handleiding van Schneider HEPD80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Schneider |
| Model | HEPD80 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2762 MB |
