Schneider Altivar 71 VW3A7201 handleiding

Niet gecategoriseerd

Schneider

38 pagina's

PDF beschikbaar

Handleiding

1757361 06/2012 33

Starting tests

Initial power-up

• Step 1: Connect the line supply.

- The braking unit is ready to operate after approximately 1 s.

• Step 2: Check that the braking unit is ready to be used.

- If the green LED only is on, the braking unit is ready to be used.

- If all the other LEDs are also on, as well as the green LED, there is interference. Eliminate the interference before starting up

(See section: “Troubleshooting”, page 36

• Step 3: Check that the drive is ready to be started up.

- Proceed in accordance with the drive manual.

CAUTION

RISKS OF INTERFERENCE

• Check the wiring of the braking unit (short circuits and ground faults) before it is

turned on for the first time

• If the wiring is not correct, unexpected operation of the drive and/or the braking unit

is possible.

Failure to follow these precautions can result in equipment damage.

Bekijk gratis de handleiding van Schneider Altivar 71 VW3A7201, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.