Schneider Altivar 61 VW3A3319 handleiding

Niet gecategoriseerd

Schneider

38 pagina's

PDF beschikbaar

Handleiding

4 1765274 08/2012

2. Before you begin

Read and understand these instructions before performing any procedure with this drive.

DANGER

HAZARDOUS VOLTAGE

• Read and understand the Installation Manual before installing or operating the Altivar 61 drive. Installation, adjustment,

repair, and maintenance must be performed by qualified personnel.

• The user is responsible for compliance with all international and national electrical standards in force concerning

protective grounding of all equipment.

• Many parts of this variable speed drive, including the printed circuit cards, operate at the line voltage. DO NOT TOUCH.

Use only electrically insulated tools.

• DO NOT touch unshielded components or terminal strip screw connections with voltage present.

• DO NOT short across terminals PA and PC or across the DC bus capacitors.

• Install and close all the covers before applying power or starting and stopping the drive.

• Before servicing the variable speed drive

- Disconnect all power.

- Place a “DO NOT TURN ON” label on the variable speed drive disconnect.

- Lock the disconnect in the open position.

• Disconnect all power including external control power that may be present before servicing the drive. WAIT 15

MINUTES to allow the DC bus capacitors to discharge. Then follow the DC bus voltage measurement procedure given

in the Installation Manual to verify that the DC voltage is less than 45 VDC. The drive LEDs are not accurate indicators

of the absence of DC bus voltage.

Electric shock will result in death or serious injury.

CAUTION

DAMAGED EQUIPMENT

Do not install or operate any drive that appears damaged.

Failure to follow this instruction can result in equipment damage.

Bekijk gratis de handleiding van Schneider Altivar 61 VW3A3319, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.