Scheppach TS30 handleiding
Handleiding
Je bekijkt pagina 29 van 56
www.scheppach.com
GB
|
29
Safe work
• Use a push rod or the handle with wooden push
block in order to guide the workpiece safely past the
saw blade.
• Make sure that the riving knife is always used and
that it is correctly adjusted.
• Use and correctly set the upper saw blade guard.
• Only use saw blades for which the maximum permis-
sible speed is not lower than the maximum spindle
speed of the insertion tool and which are suitable for
the material to be cut.
• Do not carry out rebating or grooving without a suit-
able protective device, such as a tunnel guard, being
tted over the saw table.
• Circular saws must not be used for slotting (groove
ends in the workpiece).
• When transporting the electric tool, only use the
transport devices. Never use the protective devices
for handling or transport.
• Make sure that the upper part of the saw blade is
covered during transport, e.g. by the protective de-
vice.
• Make sure to only use spacers and spindle rings that
are suitable for the purpose specied by the man-
ufacturer.
• The oor around the machine must be level, clean
and free of loose particles such as chips and cutting
residue.
• Working position always to the side of the saw blade.
• Do not remove cutting waste or miscellaneous parts
of the workpiece from the cutting area so long as the
machine is running and the sawing unit has not yet
come to a standstill.
• Ensure that the machine is always attached to a
workbench or table whenever possible.
• Secure long workpieces against tipping at the end
of the cutting process (e.g. with a reel-off stand or
roller trestle).
• m Attention! Never remove loose splinters, chips or
jammed wood pieces from the running saw blade.
• To rectify faults or remove jammed pieces of wood,
switch the machine off. - Pull out the mains plug -
• Only carry out modications, adjustment, measuring
and cleaning work when the engine is switched off.
- Pull out the mains plug -
• Before switching on, make sure that keys and adjust-
ing tools are removed.
Additional safety instructions, safety precautions
• Warning! Do not use damaged, cracked or deformed
saw blades.
• Replace a worn table insert.
• Only use saw blades recommended by the manufac-
turer which conform to EN 847-1.
m Warning! When changing the saw blade, ensure
that the cutting width is not smaller and the width of
the saw blade disc is not greater than the thickness
of the riving knife!
• Make sure that a suitable saw blade for the material to
be cut is selected.
• Wear suitable personal protective equipment. This
includes: Hearing protection to reduce the risk of
hearing loss, respiratory protection to reduce the
risk of inhaling hazardous dust.
• Wear gloves when handling saw blades and rough
materials.
• Carry saw blades in a container whenever practical.
• Wear eye protection. Sparks created during work or
fragments, chippings and dust ejected by the device
can case sight loss.
• Connect a dust collecting device to the electric tool
when sawing wood. The emission of dust is inu-
enced, among other things, by the type of material
to be processed, the signicance of local separation
(collection or source) and the correct setting of the
hood/guide plates/guides.
• Do not use saw blades made of high-speed alloy
steel (HSS steel).
• Always keep the push stick or wooden push block in
its holder on the electric tool when not in use.
Maintenance and service
• Pull out the mains plug for any adjustment or repair
tasks.
• The generation of noise is inuenced by various
factors, including the characteristics of saw blades,
condition of saw blade and electric tool. Use saw
blades which were designed for reduced noise de-
velopment, insofar as possible. Maintain the electric
tool and tool attachments regularly and if necessary,
initiate repairs in order to reduce noise.
• Report faults on the electric tool, protective devices
or the tool attachment to the person responsible for
safety as soon as they are discovered.
Bekijk gratis de handleiding van Scheppach TS30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | TS30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8355 MB |
