Scheppach TS30 handleiding
Handleiding
Je bekijkt pagina 28 van 56
www.scheppach.com
28
|
GB
17. Use extension cables for outdoors
- Only use approved and appropriately identied
extension cables for use outdoors.
- Only use cable reels in the unrolled state.
18. Always remain attentive
m Pay attention to what you are doing. Remain
sensible when working. Do not use the power tool
when you are distracted.
19. Check the power tool for potential damage
- Protective devices or other parts with minor dam-
age must be carefully inspected to ensure that
they function correctly and as intended prior to
continued use of the power tool.
- Check whether the moving parts function fault-
lessly and do not jam or whether parts are dam-
aged. All parts must be correctly mounted and all
conditions must be fullled to ensure fault-free
operation of the power tool.
- The moving protective hood may not be xed in
the open position.
- Damaged protective devices and parts must be
properly repaired or replaced by a recognised
workshop, insofar as nothing different is specied
in the operating manual.
- Damaged switches must be replaced at a cus-
tomer service workshop.
- Do not use any faulty or damaged connection
cables.
- Do not use any power tool on which the switch
cannot be switched on and off.
20. ATTENTION!
- Exercise elevated caution for double mitre cuts.
21. ATTENTION!
- The use of other insertion tools and other acces-
sories can entail a danger of injury.
22. Have your power tool repaired by a qualied elec-
trician
- This power tool conforms to the applicable safety
regulations. Repairs may only be performed by an
electrician using original spare parts. Otherwise
accidents can occur.
23. Do not use the cable for purposes for which it is
not intended.
- Do not use the cable to pull the plug out of the
outlet. Protect the cable from heat, oil and sharp
edges.
- Wear a mask when carrying out dust-creating
work.
10. Close the dust extraction system
- If connections for dust extraction and a collecting
device are present, make sure that they are con-
nected and used properly.
- Operation in enclosed areas is only permitted
with a suitable extraction system.
11. Secure the workpiece
- Use the clamping devices or a vice to hold the
workpiece in place. It is thus held more securely
than with your hand and allows the machine to be
operated with both hands.
- An additional support is necessary for long work-
pieces (table, trestle, etc.) in order to prevent the
machine from tipping over.
- Always press the workpiece rmly against the
working plate and stop in order to prevent bounc-
ing and twisting of the workpiece.
12. Avoid abnormal posture
- Make sure that you have secure footing and al-
ways maintain your balance.
- Avoid awkward hand positions in which a sudden
slip could cause one or both hands to come into
contact with the saw blade.
13. Take care of your tools
- Keep cutting tools sharp and clean in order to be
able to work better and more safely.
- Follow the instructions for lubrication and for tool
replacement.
- Check the connection cable of the power tool reg-
ularly and have it replaced by a recognised spe-
cialist when damaged.
- Check extension cables regularly and replace
them when damaged.
- Keep the handle dry, clean and free of oil and
grease.
14. Pull the connector out of the socket
- Never remove loose splinters, chips or jammed
wood pieces from the running saw blade.
- When the power tool is not in use or prior to main-
tenance and when replacing tools such as saw
blades, bits, milling heads.
15. Do not leave a tool key inserted
- Before switching on, make sure that keys and ad-
justing tools are removed.
16. Avoid inadvertent starting
- Make sure that the switch is switched off when
plugging the plug into an outlet.
Bekijk gratis de handleiding van Scheppach TS30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | TS30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8355 MB |
