Scheppach TS30 handleiding
Handleiding
Je bekijkt pagina 27 van 56
www.scheppach.com
GB
|
27
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.
5. General safety information
Attention! The following basic safety measures must
be observed when using power tools for protection
against electric shock, and the risk of injury and re.
Read all these notices before using the power tool and
store the safety instructions well for later reference.
Safe work
1. Keep the work area orderly
- Disorder in the work area can lead to accidents.
2. Take environmental inuences into account
- Do not expose power tools to rain.
- Do not use power tools in a damp or wet envi-
ronment.
- Make sure that the work area is well-illuminated.
- Do not use power tools where there is a risk of
re or explosion.
3. Protect yourself from electric shock
- Avoid physical contact with earthed parts (e. g.
pipes, radiators, electric ranges, cooling units).
4. Keep away from children!
- Do not let other people touch the tool or the cable,
keep them away from your work area.
5. Securely store unused electric tools
- Unused power tools should be stored in a dry,
elevated or closed location out of the reach of
children.
6. Do not overload your power tool
- They work better and more safely in the specied
output range.
7. Use the correct power tool
- Do not use low-output power tools for heavy work.
- Do not use the power tool for purposes for which it
is not intended. For example, do not use handheld
circular saws for the cutting of branches or logs.
- Do not use the electric tool to cut rewood.
8. Dress properly
- Do not wear wide clothing or jewellery, which can
become entangled in moving parts.
- When working outdoors, anti-slip footwear is rec-
ommended.
- Tie long hair back in a hair net.
9. Use protective equipment
- Wear eye protection.
4. Proper use
The circular table saw is used for the longitudinal and
transverse cutting (only with the transverse stop) of all
types of timbers, in accordance with the machine size.
It is not permitted to cut any type of round timber.
The machine may only be used in the intended man-
ner.
Any use beyond this is improper. The user/operator,
not the manufacturer, is responsible for damages or
injuries of any type resulting from this.
Only suitable saw blades (HM or CV saw blades) may
be used for the machine.
The use of HSS saw blades and any type of cutting
wheels is prohibited. An element of the intended use is
also the observance of the safety instructions, as well
as the assembly instructions and operating information
in the operating manual.
Persons who operate and maintain the machine must
be familiar with the manual and must be informed about
potential dangers. In addition, the applicable accident
prevention regulations must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
Attention!
When using equipment, several safety warnings must
be observed to prevent injuries and damage. For this
reason, please carefully read this operating manual /
safety instructions. Keep them in a safe place so that
the information is available at all times. If the device is
handed over to another person, hand over the operat-
ing and safety instructions with it. We accept no liabil-
ity for accidents or damage that occur due to a failure
to observe this manual and the safety instructions.
The liability of the manufacturer and resulting dam-
ages are excluded in the event of modications of the
machine.
Despite use as intended, specic risk factors cannot
be entirely eliminated. Due to the design and layout of
the machine, the following risks remain:
• Contact with the saw blade in the exposed sawing
area.
• Reaching into the running saw blade (cutting injury)
• Kick-back of workpieces and workpiece parts.
• Saw blade breakage.
• Ejection of faulty carbide parts of the saw blade.
• Hearing damage when the necessary hearing pro-
tection is not used.
• Harmful emissions of wood dusts during use in en-
closed areas.
Bekijk gratis de handleiding van Scheppach TS30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | TS30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8355 MB |
