Scheppach TS30 handleiding
Handleiding
Je bekijkt pagina 26 van 56
www.scheppach.com
26
|
GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. A)
1. On/off switch
2. Longitudinal stop
3. Saw blade
4. Protective cover
5. Extraction hose
6. Riving knife
7. Table inlay
8. Table width extension
8.1 Sliding carrier plate
9. Travel xture
10. Extraction port
11. Transport handle
12. Height adjustment
3. Scope of delivery
• HS120 circular table saw
• Longitudinal stop
• Sliding carriage with longitudinal stop and angle rail
• Saw blade guard with screw and wing nut
• Push stick
• Table extension
• 2x Table length extension supports
• 2x Table length extension supports
• Wheel and lug unit
• 4x frame feet
• 2x longitudinal struts
• 2x cross members
• Saw blade
• Saw blade key
• Suction hose with fastening clamp
• Extraction port
• Enclosed accessories bag
• Operating manual
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specied
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and extend-
ing the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
Bekijk gratis de handleiding van Scheppach TS30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | TS30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8355 MB |
