Scheppach DS940 handleiding
Handleiding
Je bekijkt pagina 22 van 68
22
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
10.2.2. Replacing the power supply line
lf the power supply line of this power tool is damaged,
it must be replaced by the manufacturer or the cus-
tomer service or an equally qualied person in order
to avoid risks.
Warning! There are no parts inside the power tool
which can be serviced by the operator! Never
open the power tool! Take it to a qualied special-
ist for further maintenance!
10.3. Storage
m Important! Pull out the mains plug!
1. Whenever you do not use the power tool, you
must keep it in a dry and well ventilated place out
of the reach of children, e.g. on a high cabinet or
in a closed place.
2. Keep power tool, instruction manual and acces-
sory parts, if any, together in the original packag-
ing, if possible. Thus you have all information and
parts available at any time.
11. Transport
m Important! Pull out the mains plug!
1. Always hold the power tool by its handle.
2. To avoid transport damages, you must pack the
power tool or use the original packaging.
3. Protect the power tool against vibrations and
shock, especially during transport in vehicles.
12. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types of
material, such as metal and plastic. Defective compo-
nents must be disposed of as special waste. Ask your
dealer or your local council.
The packaging is wholly composed of
environment ally-friendly materials that can be
disposed of at a local recycling centre.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
regularly. Make sure that the connection cable does
not hang on the power network during the inspection.
Electrical connection cables must comply with the ap-
plicable VDE and DIN provisions. Only use connec-
tion cables with the marking „H05VV-F“.
The printing of the type designation on the connection
cable is mandatory.
AC motor
• The mains voltage must be 230 - 240 V~ 50 Hz.
• Extension cables up to 25 m long must have a
cross-section of 1.5 mm
2
.
Connections and repairs of electrical equipment may
only be carried out by an electrician.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine data - type plate
10. Cleaning, maintenance, and storage
m Important!
Pull out the power plug before doing any cleaning and
maintenance work on the equipment. Risk of injury
from electric shock!
m Important!
Wait until the equipment has cooled down completely!
Risk of burns!
10.1. Cleaning
• Keep the equipment free of dirt and dust as far as
possible. Wipe the equipment with a clean cloth or
blow it down with compressed air at low pressure.
• We recommend that you clean the equipment im-
mediately after you use it.
• Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the plastic
parts in the equipment. Ensure that no water can
get into the interior of the equipment.
10.2. Maintenance
Check the power tool and accessory parts (e.g. inser-
tion tools) for wear and damage before and after each
operation. lf necessary, replace worn out or damaged
parts with new parts and make sure to comply with the
operating instructions. Observe any technical require-
ments.
10.2.1. Grinding plate, brushed edge
Have a qualied specialist replace damaged or worn
out grinding plates (1) and brush edges (A) with new
ones of the same type.
Bekijk gratis de handleiding van Scheppach DS940, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | DS940 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11359 MB |
