Scheppach C-BSB74/1BE-X handleiding
Handleiding
Je bekijkt pagina 24 van 60
9.8 Set direction of rotation
ATTENTION
The direction of rotation switch may only be actuated
when idle.
With the direction of rotation switch, you can select the di-
rection of rotation of the product (clockwise or anti-clock-
wise) and secure the product from being switched on un-
intentionally. The arrow on the direction of rotation switch
indicates the working direction.
1. Wait until the product has come to a standstill.
2. Push the direction of rotation switch (10) to the de-
sired position:
– Clockwise rotation: For drilling and screwing
in screws. Press the direction of rotation switch to
the right.
– Anti-clockwise rotation: To undo screws. Press
the direction of rotation switch to the left.
3. Switch lock: Put the direction of rotation switch in the
centre position.
9.9 Adjusting the torque / Selecting the
operating mode (Fig. 1)
ATTENTION
The torque adjusting ring may only be actuated when
idle.
Note:
A clear ratcheting sound is heard when reaching the pre-
set torque limit. This noise is caused by the slip clutch.
Note:
You can preset the maximum torque by turning the torque
adjusting ring (3) and, by turning the mode selection ad-
justing ring (3a), select the screw setting drill setting
and hammer-drill setting . There are 25 torque levels +
1 screw setting + 1 drill setting + 1 hammer-drill setting.
• Select a low level for small screws or soft materials.
• Select a high level for large screws, hard materials or
when unscrewing screws.
• For drilling work, select the drill setting by adjusting
the mode selection adjusting ring (3a) into position .
• For percussion drilling, select the percussion level by
turning the mode selection ring (3a) to the position .
Requirement: Torque Operating mode:
Screws: Level 1 - 25
Screw setting
Drilling: -
Drill setting
Hammer-drilling: - Hammer-drill
setting
9.10 On/Off switch (9) (Fig. 1)
The speed can be steplessly controlled by the on/off
switch. The further you press the on/off switch, the higher
the speed.
1. To switch on the product, push the on/off switch (9).
2. To switch off, release the on/off switch (9).
If you put the direction of rotation switch (10) in the
centre position, the product is secured from being
switched on.
9.10.1 LED work lamp (8) (Fig. 1)
This product is equipped with an LED work lamp to illumi-
nate the immediate work area and improve visibility in
poorly lit environments.
CAUTION
Do not look directly into the LED work lamp or the light
source.
1. The LED work lamp (8) lights up automatically as
soon as the product is switched on.
Note:
The LED work lamp remains lit up for approx. 10 seconds
after the product is switched off.
10 Accessory set
10.1 Cutter knife (24)
1. Press the unlocking on the cutter knife (24) to pull out
the insert with the spare blades.
10.2 Measuring tape (21)
1. Push the locking slider forward to fix the pulled out
measuring tape (21).
2. Release the fixation by pulling back the locking slider.
3. Press and hold one of the locking buttons to temporar-
ily fix the pulled-out measuring tape (21).
4. With the clip, on the back, you can attach the measur-
ing tape (21) to the belt.
10.3 Center punch (23)
1. With the centre punch (23) you can give a drill an ini-
tial guide at a fixed position to prevent the drill from
running when starting to drill.
2. You can also use the centre punch (23) to mark work-
pieces.
3. Place the centre punch (23) with the tip at the desired
position and hit the back of the centre punch (23) with
a hammer (not included).
11 Working instructions
* = not included in the scope of delivery!
Torque
• Smaller screws*/bits may be damaged if you set too
high a torque or speed.
Hard screwing case (into metal)
• Particularly high torques occur, for example, with met-
al screw connections using sockets. Select a low
speed.
Soft screwing case (e.g. into wood)
• Also screw here with a low speed to ensure the wood
surface is not damaged by contact with the screw
head. Use a countersink.
24 | GB www.scheppach.com
Bekijk gratis de handleiding van Scheppach C-BSB74/1BE-X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | C-BSB74/1BE-X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8420 MB |
