Scheppach C-BSB74/1BE-X handleiding
Handleiding
Je bekijkt pagina 25 van 60

When drilling into wood, metal and other materials
• Use a high speed for small drill diameters and a low
speed for large drill diameters.
• Select a low speed for hard materials and a high
speed for soft materials.
• Secure or fasten (if possible) the workpiece is a
clamping device*.
• Mark the place where you want to drill with a centre
punch or a nail*. Select a low speed to drill.
• Pull the rotating drill out of the drillhole several times
to remove chips and drilling dust.
Drilling into metal
• Use metal drill bits (HSS). For best results, cool the
drill with cooling lubricant* (cutting oil). Metal drills can
also be used for drilling into plastic. First pre-drill with
a Ø 3mm drill bit and approach the desired drill diame-
ter.
Drilling into wood
• Use a wood drill with a centre point.
Depth holes: Use an “auger”*.
Large drill diameter: Use a Forstner drill*.
Small screws* in soft wood can also be screwed in di-
rectly without predrilling.
Drilling into bricks
• Used a carbide-tipped masonry drill (max. Recom-
mended drilling diameter Ø 13 mm).
12 Cleaning and maintenance
WARNING
Have maintenance and repair tasks that are
not described in this operating manual, car-
ried out by a specialist workshop. Use only
original spare parts.
There is a risk of accident! Always perform
maintenance and cleaning work with the bat-
tery removed.
There is a danger of injury! Let the Product
cool down before all maintenance and clean-
ing tasks. Elements of the engine are hot.
There is a danger of injury and burning!
The product can start unexpectedly and cause injuries.
– Remove the battery.
– Allow the product to cool down.
– Remove the tool attachment.
12.1 Cleaning
1. Keep protective devices, air vents and the motor
housing as free of dust and dirt as possible. Rub the
product clean with a clean cloth* or blow it off with
compressed air* at low pressure. We recommend that
you clean the product directly after every use.
2. Ventilation openings must always be free.
3. Do not use any cleaning products or solvents; they
could attack the plastic parts of the product. Make
sure that no water can penetrate the product interior.
12.2 Maintenance
The product is maintenance-free.
13 Storage
1. Remove the battery from the product before pro-
longed storage (e.g. winter storage).
2. Clean and check the product for damage.
3. Store the battery in a partially charged state.
4. When stored, check the battery charge level every
three months.
Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children.
The optimum storage temperature is between 5°C and
30˚C.
Store the product in its original packaging.
Cover the product to protect it from dust or moisture.
Store the operating manual with the product.
14 Repair and ordering spare parts
With this product, it is necessary to note that the following
parts are subject to natural or usage-related wear, or that
the following parts are required as consumables.
ATTENTION
According to the German Product Liability Act, no liabili-
ty is accepted for damage caused by improper repairs
or by not using original spare parts.
Such work should be performed by a customer service
centre or an authorised specialists. The same applies to
accessory parts.
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the front
page.
14.1 Ordering spare parts
Please provide the following information when ordering
spare parts:
• Model designation
• Item number
• Type plate data
Spare parts / accessories
Battery pack SBP2.0 - Article no.: 7909201708
Battery pack SBP4.0 - Article no.: 7909201709
Battery charger SBC2.4A - Article no.: 7909201710
Battery charger SBC4.5A - Article no.: 7909201711
Battery charger SDBC2.4A - Article no.: 7909201712
Battery charger SDBC4.5A - Article no.: 7909201713
StarterKit SBSK2.0 - Article no.: 7909201720
StarterKit SBSK4.0 - Article no.: 7909201721
15 Disposal and recycling
Notes for packaging
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
GB | 25www.scheppach.com
Bekijk gratis de handleiding van Scheppach C-BSB74/1BE-X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Scheppach |
Model | C-BSB74/1BE-X |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 8420 MB |