Scheppach BLM560-225ES handleiding
Handleiding
Je bekijkt pagina 40 van 328
40
|
GB
Attention!
Always shut the engine down and remove the spark
plug connector before carrying out any maintenance
work.
Wheel axles and wheel hubs
• These should be lightly greased once a season.
Blade
For safety reasons, only have your mowing blade
sharpened, balanced and tted by an authorised spe-
cialist workshop. For optimum results it is recommend-
ed that the blade should be inspected once a year.
Change the blade (Fig. 17)
When changing the cutting tool, only use original re-
placement parts.
Wear gloves to avoid cut injuries while changing the
blade.
Never install another blade.
• Empty the fuel tank before removing the blade.
• Undo the screw to replace the blade.
• Install everything as described in Fig. 17. Fasten the
screw correctly. The fastening torque in 45 Nm. Also
replace the blade screw when replacing the blade.
Damaged blades
Should the blade, in spite of all precautions, come
into contact with an obstruction, shut down the engine
immediately and remove the spark plug connector.
Tip the lawnmower onto its side and check the blade
for damage. Damaged or bent blades must be re-
placed. Never attempt to bend a bent blade back to
straight again. Never mow the lawn with a bent or
heavily worn blade as this will cause vibrations and
can lead to further damage to the mower.
m Attention! There is a risk of injury if you work with
a damaged blade.
Resharpening the blade
The blades can be resharpened with a metal le.
In order to avoid an imbalance, sharpening should only
be performed by an authorised specialist workshop.
Oil level check
m Attention! Never operate the engine without oil or
with too little oil. This can cause serious damage to
the engine. Only use SAE 30 engine oil.
Check the oil level (Fig. 18):
• Position the lawnmower on a straight, level surface.
• Remove the oil dipstick (12) by turning it to the left,
then wiping it down. Insert the oil dipstick (12) back
in the lling nozzle as far as the stop, but do not
screw it back in.
• Remove the spark plug from the cylinder head.
• Fill the cylinder with approx. 20 ml of oil from an
oil can.
• Slowly pull back the starter handle, which will bathe
the cylinder wall with oil.
• Attach the spark plug again.
• Clean the cooling ns of the cylinder and the hous-
ing.
• Be sure to clean the entire device to protect the
paint.
• Store the device in a well-ventilated place.
Battery (20) and battery charger (21)
Disconnect the battery charger (21) and store it in a
cool, dry place when not in use. In humid environ-
ments, corrosion of terminals and electrical contacts
may occur. If stored for a long time at high temper-
atures (50°C), the battery (20) may be permanently
damaged. Check electrical terminals and contacts on
battery (20) and battery charger (21).
Wipe with a clean cloth or blow clean with com-
pressed air.
Normal charging may be required after storage.
To check the available charge, press the battery level
indicator button and charge if necessary. See the bat-
tery level indicator section.
13. Maintenance
• Regular, careful servicing is required to guarantee
the safety level and performance of the device.
• Make sure that all nuts, bolts and screws are se-
curely tightened so that the device is in a safe work-
ing condition.
• Regularly check the catch basket for signs of wear
and loss of functionality.
Clean the collection basket (16) regularly with water
and allow it dry well.
• For safety reasons, replace worn or damaged
parts.
• When storing the machine for a longer period of time
or when maintaining it, the fuel tank (6) must be emp-
tied. This should only be done outdoors using a petrol
suction pump (available from DIY shops).
m WARNING
Never work on or touch conducting parts on the igni-
tion unit with the engine running. Always remove the
spark plug connector from the spark plug (10) before
starting any work of care or maintenance.
Never perform any work on the machine while it is
running. Any work not described in this operating
manual must be performed by an authorised service
workshop only.
Bekijk gratis de handleiding van Scheppach BLM560-225ES, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | BLM560-225ES |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 48278 MB |
