Scheppach BLM560-225ES handleiding
Handleiding
Je bekijkt pagina 38 van 328
38
|
GB
Tips for mowing:
• Pay attention to ensure that you do not run into or
over solid objects. The lawnmower could be dam-
aged and/or the machine could inict bodily injury.
• A hot engine, exhaust pipe or drive unit can burn
the skin. Thus, do not touch these parts.
• Use extra caution when mowing on inclines and
steep grades.
• Only mow when there is sucient light.
• Check the mower, the blade and other parts if they
have struck a foreign object or if the machine vi-
brates more than usual.
• Do not make any adjustments or repairs until the
engine has been switched o. Pull o the spark
plug connector.
• Pay special attention to trac if you are mowing
directly next to a street or are close by one. Always
keep the grass chute pointed away from the street.
• Avoid mowing in places where the wheels have
trouble gripping or mowing is unsafe in any other
way. Before you back up, ensure that nobody is
standing behind you (especially little children).
• In dense, tall grass, set the highest cutting level and
mow more slowly. Before you remove any grass or
blockages of any kind, switch o the engine and dis-
connect the ignition cable.
• Never remove any safety-related parts.
• Never ll the engine with petrol when it is hot or is
running.
Emptying the catch basket (16)
As soon as grass residues are left lying behind on the
ground during mowing, the catch basket (16) must be
emptied.
m WARNING
Before removing the catch basket (16), stop the
engine and wait for the cutting tool to come to a
standstill.
To remove the catch basket (16), lift the discharge
ap (15) with one hand and remove the catch basket
(16) by the carrying handle with the other hand (Fig.
16). In accordance with the safety regulations, the
discharge ap (15) closes when the catch basket is
unhooked and closes the rear ejection opening.
If grass cuttings remain in the opening, it is advisa-
ble to pull the lawnmower back about 1m to make it
easier to start the engine. Do not remove cuttings in
the mower housing and on the working tool by hand
or with your feet, but with suitable aids, e.g. brush or
hand brush.
To ensure good collection, the catch basket (16) and
in particular the air grille must be cleaned from the
inside after use.
Only hook in the catch basket (16) when the engine is
switched o and the cutting tool is stationary.
Always secure the discharge ap (15) and the catch
basket (16) carefully. Switch o the engine before re-
moving.
The safety distance between the blade housing and
the user given by the guide rails must always be main-
tained. Special care must be taken when mowing
and changing direction on embankments and slopes.
Make sure you have a secure footing, wear shoes with
non-slip, well gripping soles and long trousers. Always
mow across slopes.
For safety reasons, slopes with an inclination of more
than 15 degrees must not be mowed with the lawn
mower.
Exercise particular caution when moving backwards
and pulling the lawnmower. Risk of tripping!
Mulching
When mulching, the cuttings are shredded in the
closed mower housing and then dispersed on the
lawn. Grass collection and disposal is not required.
m NOTE! Mulching is only possible on relatively
short lawns.
To use the mulching function, unhook the catch bas-
ket (16) and slide the mulching insert (19) (Fig.10-12)
into the discharge opening and close the discharge
ap (15).
Mowing
Cut only with sharp, clean cutting blades so that the
blades of grass do not fray and the lawn does not turn
yellow.
To achieve a clean cut, guide the lawnmower in the
straightest possible paths. These strips should always
overlap by a few centimetres so that no patches remain.
Keep the underside of the mower housing clean and
remove any grass deposits. Deposits make the start-
ing process more dicult, impair cutting quality and
grass discharge. On slopes, the cutting path should
be made perpendicular to the slope. It is possible to
prevent the lawnmower from slipping by lifting it up-
wards at an angle. Set the cutting height depending
on the actual length of the lawn. Carry out several
passes so that a maximum of 4 cm of lawn is re-
moved at a time.
Switch o the engine before carrying out any checks
on the blade. Remember that the blade will contin-
ue to rotate for a few seconds after the engine is
switched o. Never try to stop the blade.
Regularly check that the blade is properly fastened, in
good condition and sharpened. Sharpen or replace it if
this is not the case.
If the moving blade strikes an object, stop the mower
and wait for the blade to come to a complete stop.
Then check the condition of the blade and the blade
holder. If it is damaged, it must be replaced.
Bekijk gratis de handleiding van Scheppach BLM560-225ES, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | BLM560-225ES |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 48278 MB |
