Sauermann CPE 311-S handleiding
Handleiding
Je bekijkt pagina 10 van 28
4. F 100: Configure the transmitter
This folder allows to congure the following parameters of the transmitter: safety code, modbus, options and factory
conguration.
It also indicates the serial number and the rmware version of the transmitter.
4.1. Access to the serial number: F100
The serial number allows to get activation codes for the options.
F 100 is displayed (see previous page).
➢ Press OK.
“F 100” is displayed with the serial number of the transmitter that scrolls below.
4.2. Access to the firmware version: F101
F100 folder is displayed.
➢ Press Up key.
“F 101” is displayed with the version number that scrolls below (e.g: 1.00)
4.3. Lock the keypad: F 140
For more safety and to avoid any handling mistake, it is possible to lock the keys.
F101 sub-folder is displayed.
➢ Press Up key.
“F 140” is displayed with “0” indicating that the locking is on.
➢ Press OK.
“0” blinks.
➢ Press Up or Down key, “1” blinks, then press OK.
“LOCK” is displayed for a few seconds then the transmitter backs to the displaying of measured values.
All the keys are inactive.
To activate them again:
➢ Press OK for 10 seconds.
“LOCK” is displayed for a few seconds then the transmitter goes back to the displaying of measured values and
keys are active again.
4.4. Modify the safety code: F141
It is possible to modify the safety code.
F140 sub-folder is displayed.
➢ Press Up key.
“F 141” is displayed with the safety code below.
➢ Press OK.
The 1
st
zero blinks.
➢ Press Up or Down key to modify the digit then press OK.
The 2
nd
digit blinks.
➢ Press Up or Down key to modify the digit then press OK.
The 3
rd
digit blinks.
➢ Press Up or Down key to modify the digit then press OK.
The 4
th
digit blinks.
➢ Press Up or Down key to modify the digit then press OK.
“OK”» is displayed.
➢ Press OK to validate the modication of the code or Esc to cancel.
The transmitter goes back to the displaying of the F141 folder with the new code indicated below.
10
F 100: Congure the transmitter
Bekijk gratis de handleiding van Sauermann CPE 311-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sauermann |
| Model | CPE 311-S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3055 MB |
