Sauermann CPE 311-S handleiding
Handleiding
Je bekijkt pagina 9 van 28
3. Access to the different functions
This step is compulsory for each conguration.
First, to access to the transmitter functions, and for safety, a safety code must be entered. The default safety code is 0101.
• The transmitter must be energized.
➢ Connect the transmitter.
➢ Wait until the initializing period is over.
➢ Press OK.
“Code” is displayed with “0000”. The 1
st
0 blinks.
➢ Press OK to go to the 2
nd
0.
It blinks.
➢ Press Up key to display 1 then press OK.
The 3
rd
0 blinks.
➢ Press OK to go to the 4
th
0.
➢ Press Up key to display 1 then press OK.
The following screen is displayed:
“F 100” is for the number of the conguration folder. There are 5 folders:
• F 100: folder of the transmitter conguration. See page 10.
• F 200: folder of the channels and measurement units. Seer page 13.
• F 300: folder of the analogue outputs. See page 14.
• F 400: folder of the alarms. See page 17.
• F 500: folder of the channels, integration and autozero conguration. See page 20.
To select the required folder:
“F 100” is displayed and 1 is blinking.
➢ Press Up key until the number of the required folder is displayed (F 100, F 200, F 300 or F 500).
➢ Press OK.
Access to the different functions
9
Code
0101
F 100
Bekijk gratis de handleiding van Sauermann CPE 311-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sauermann |
| Model | CPE 311-S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3055 MB |
