Handleiding
Je bekijkt pagina 24 van 56
English-24
Checking the usage time
This function will displayed the accumulated operation time from the moment the air conditioner was turned on to the point
when the usage function has been selected
When the air conditioner is operating;
Indoor unit display
1. Press the Settings button.
2. Press the
, or Settings button until (Usage) indicator starts to blink.
3. Press the SET button to check the usage time.
- 3 seconds after setting usage time checking function, (Usage) indicator on the
remote controller will disappear.
- Usage time will be displayed in hour. 0.1 equals to 6 minutes.
Ex) 0.1 6 minutes of usage, 2.5 2 hours and 30 minutes of usage, 3.7 3
hours and 42 minutes of usage.
- Usage time will be displayed for certain period of time and it will
automatically changed to indoor temperature.
- Usage time will begin to accumulate when the air conditioner turns on, and
accumulated usage time will be reset when it turns o.
- Initial value of usage time is 0.0 and maximum value is 99. (Unit: hour)
• When the air conditioner is not operating, usage time will not be
displayed on the indoor unit display.
Settings
Using the Auto clean function
Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with
clean air.
When the air conditioner is operating;
Indoor unit display
1. Press the Settings button.
2. Press the
, or Settings button until (Clean) indicator starts to blink.
3. Press the SET button to set the Auto clean function.
- 3 seconds after setting Auto clean function, (Clean) indicator on the remote
controller display will disappear and Auto clean (
) and Timer ( )
indicator will turn on the indoor unit display. Auto clean function will be
activated after the air conditioner stops operating.
- Duration of the Auto clean function can be dierent depending on the
previous operation mode used.
Auto(cool),Cool,Drymode:30minutes.
Auto(heat),Heat,Fanmode:15minutes.
Cancel
Press the Settings button Press the , or Settings button
to make the (Clean) indicator blink and press the SET button.
• When the operation mode is set during Auto clean function is activated,
the air conditioner will operate in chosen operation mode and the Auto
clean function will be re-activated when the operation stops.
• During the auto clean function, indoor fan will continue to run and air
ow blade will remain open to expel ambient air.
•
lighting in Auto clean mode.
HC_BETTER_A3050_IB&IM_EN_DB68-04953A_UX.indd 24 10/20/2015 10:59:56 AM
Bekijk gratis de handleiding van Samsung AR19KPSDCWK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AR19KPSDCWK |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 7593 MB |
