Handleiding
Je bekijkt pagina 38 van 41
GB GB
TECHNICAL SPECIFICATION
Model identification TI72001FLX25/A
Cooking Zones 4 Zones
Supply Voltage 220-240V~/380-415V 2N~
Installed Electric Power 7200W
590×520×60
560×490
Product Size D x W x H (mm)
Building-in Dimensions A x B (mm)
Failure display and inspection
If an abnormality comes up, the induction hob will enter the
protective state automatically and display corresponding
protective codes:
Fault
Code
Possible Cause Description
Pan or pot fault
No pan or pot,or their size,material,etc. is
not suitable, or not placed precisely in the
middle of the cooking area.
E2
E1
Voltage is too high Higher than AC 265V.
E3 Voltage is too low Lower than AC 180V.
E4 IGBT sensor open-circuit
When the IGBT sensor detects an
open-circuit, the IGBT sensor stops working.
E5 IGBT sensor short-circuit
When the IGBT sensor detects an
short-circuit, the IGBT sensor stops working.
E6
IGBT sensor over
temperature
IGBT reaches 110±5˚C for 3s (It can recover
automatically when temperature decrease
50˚C-70˚C).
E7
Hob surface sensor
open-circuit
After 60 seconds of operation, IGBT stops
working when the temperature detection
circuit of pot has detected an open-circuit.
E8
Hob surface sensor
short-circuit
IGBT stops working when the temperature
detection circuit of pot has detected
an short-circuit.
E9
High temperature
protection of pot sensor
IGBT stops working when the temperature
detection circuit of the pot is detected to
exceed a certain value.
The above are the judgment and inspection of common failures.
Fault
Code
Possible Cause Description
Pot sensor removal or
failure protection
When the pot sensor is moved out, and the
whole machine is heated for a period of
time, the corresponding area will detect
the moving out state of the cooker sensor,
and the heating area will stop heating.
EA
Communication fault
The power board does not receive a valid
communication signal from the display
board for 90 seconds.
EB
Communication fault
The display board does not receive a valid
communication signal from the power
board for 90 seconds.
EC
Hob surface is of high
temperature.
After the hob is off,if the hob surface
temperature is too high,it will display
"H",and the fan will delay working for
2 minutes.
H
73
72
Bekijk gratis de handleiding van Saba TI72001FLX25/A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI72001FLX25/A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5355 MB |
