Handleiding
Je bekijkt pagina 37 van 41
TROUBLESHOOTING
Problem Possible causes What to do
The cooktop
cannot be
turned on.
No power.
Make sure the cooktop is
connected to the power
supply and that it is switched
on.
Check whether there is a
power outage in your home
or area. If you’ve checked
everything and the problem
persists, call a qualified
technician.
The touch
controls are
unresponsive.
The controls are locked.
Unlock the controls. See
section ‘Using the hob’ for
instructions.
The touch
controls are
difficult to
operate.
There may be a slight film of
water over the controls or you
may be using the tip of your
finger when touching the
controls.
Make sure the touch control
area is dry and use the ball of
your finger when touching
the controls.
The glass is
being
scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
Use cookware with flat and
smooth bases. See ‘Choosing
the right cookware’.
See ‘Maintenance and
cleaning’.
Some pans
make crackling
or clicking
noises.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
This is normal for cookware
and does not indicate a fault.
Problem Possible causes What to do
The induction
hob makes a
low humming
noise when used
on a high heat
setting.
This is caused by the
technology of induction
cooking.
This is normal, but the noise
should quieten down or
disappear completely when
you decrease the heat
setting.
Fan noise
coming from the
induction hob.
A cooling fan built into your
induction hob has come on to
prevent the electronics from
overheating. It may continue
to run even after you’ve turned
the induction hob off.
This is normal and needs no
action.
Do not switch the power to
the induction hob off at the
wall while the fan is running.
Pans do not
become hot
and appear in
the display.
The induction hob cannot
detect the pan because it is not
suitable for induction cooking.
The induction hob cannot
detect the pan because it is too
small for the cooking zone or
not properly centered on it.
Use cookware suitable for
induction cooking. See
section ‘Choosing the right
cookware’.
Centre the pan and make
sure that its base matches the
size of the cooking zone.
The induction
hob or a cooking
zone has turned
itself off
unexpectedly, a
tone sounds or
an error code is
displayed.
Technical fault.
Please note down the letters
and numbers, switch the
power to the induction
hob off at the wall, and
contact a qualified
technician.
GB GB
71
70
Bekijk gratis de handleiding van Saba TI72001FLX25/A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI72001FLX25/A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5355 MB |
