RTS PS-20 handleiding
Handleiding
Je bekijkt pagina 8 van 22
8 Introduction PS-20 Power Supply
Status Indicators - There is a green status indicator for each channel. Each of these indicators remains lit during
normal operation, but turns RED during a channel current overload condition. Output current
is automatically reduced during an overload, and normal operation is restored when the
overload is removed.
Program Input - There is a Program Input connector on the rear panel. This can be used to connect a device
that both channel 1 and channel 2 can listen to at the same time (for example, a radio). A
Channel Select switch on the front panel assigns the program to either or both channels. A
Level control adjusts the program level to the intercom channel.
Intercom Channels
Connections -
Intercom channels are connected to the rear panel of the PS-20 with 3-pin XLR connectors.
Selectable Termination
Impedance -
The IMPEDANCE SELECT switch on the rear panel allows each channel to be set for 200
or 400 operation. Select 200 for each channel operated independently. Select 400 for
each channel connected to another channel.
Bekijk gratis de handleiding van RTS PS-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RTS |
| Model | PS-20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3614 MB |
