Rowenta X-Plorer Serie 220 RR9495 Handleiding (137 Pagina's)

Handleiding

8 9

Install the robot Install the robot

Flash the QR-Code above to know how to install and connect the robot in video. Read

the following instructions for more detailed informations.

Remove all protections (protective lms) on the station and on the robot. Reverse the

robot, install the side brush by gently clipping it. The side brush is correctly installed

when you hear a click sound.

Install the Automatic Dust Collecting Station on a hard and at oor. Avoid parquet,

wooden oors and carpet. Place the station in a clear space against a wall, with no

stairs in front of the station. Keep at least 0.5 m of clearance on either side and 1.5m in

front. Make sure the chosen location is close to the Wi-Fi box or has good Wi-Fi signal

strength. Keep the area around the station clear from any object, reective surface,

mirror, table and chair. Keep the station away from direct sunlight. Plug the power

cable. Make sure the power cable remains against the wall.

Turn the robot on by pressing and holding the START button until the robot lights turn on (~5

seconds). Manually place the robot against the station. Once the robot is docked, the dust

collection will be automatically activated for few seconds. Please note that the minimum time

interval between two dust collections is 5 minutes. Wait 3-4 hours for the robot to be fully charged.

For the rst-time cleaning, please ensure that the robot is fully charged. For the rst cleaning in a

new environment, the robot will create the home map. In order to improve the accuracy of the map,

don’t use the vibrating water tank, keep the «vacuum only» module installed in the robot.

Do not lift the robot during the rst cleaning, it prevents the map creation.

If you have carpets with fringes, please place barriers around carpets to prevent the robot from

getting stuck in the fringes, it prevents the map creation.

If you have an outdoor area (garden, balcony, patio, etc.) accessible with a threshold less than 2

cm high or without threshold (for example with a French window, a patio door, a bay window, etc.),

please close this access so the robot doesn’t go outside your home.

CLICK

1.5m

0.5m

5

sec

ENEN

Bekijk gratis de handleiding van Rowenta X-Plorer Serie 220 RR9495, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.