Roland TMC-6 handleiding
Handleiding
Je bekijkt pagina 16 van 32
16
Example of Connections and Settings
[TD]
8. With the right [CURSOR], move the cursor to the instrument name.
[TMC]
9. Set the note number transmitted by the TMC-6 pad to the TD-10.
* If you select Memory Number 2 in Step 3, it is not necessary to change the Note
Number of the TMC-6.
When the TMC-6 pad is struck with the TD-10’s percussion group screen
displayed, the cursor moves to the corresponding note number, and the
selected instrument is played, and this makes it easier to set the note number.
When the instrument name appears as (for example) “[H1],” it indicates that
the selected instrument is played with the TD-10 pad, so select a different
note number for the TMC-6.
[TD]
10.In the TD-10’s percussion group screen, select the TD-10 instrument.
After striking a TMC-6 pad, select the TD-10 instrument.
[TD]
11.Adjust the volume balance between the drum kit (the TD-10 pad) and
the percussion group (the TMC-6 pad) ([CONTROL ROOM] -
[F1(MIXER)] - [F4(GRPVOL)]).
The overall volume of the percussion group is set lowered, so this should be
raised to about 100.
[TD]
12.Make volume, pan, and other settings for each instrument as needed
([KIT] - [F2 (FUNC)] - [F1(PRCGRP)] - [F2(EDIT)]).
For more detailed information on each parameter, refer to “Using the
percussion group” in the TD-10 Owner’s Manual (p. 126).
Notes When Adding Pads to the TD-8/6
(1) Setting the MIDI Channel
With the pad connected to the TMC-6’s trigger input, it plays the percussion
set instrument selected in the TD-8/6’s percussion part. If the drum kit part
and percussion part share the same MIDI channel, the drum kit instrument is
played when you strike the TMC-6’s pad, so set the percussion part to a
different MIDI channel (for example, Ch 11). See “Setting the MIDI Channel
for a Part” in the TD-8 Owner’s Manual (p. 154), “MIDI Channel Settings for
a Part” in the TD-6 Owner’s Manual (p. 102).
Also set the TMC-6’s MIDI channel to the same MIDI channel used for the
TD-8/6’s percussion part.
The TD-10’s instruments
can only be played using
Note Numbers 22–93.
If the TMC-6’s pads and
the TD-10’s are set with the
same note numbers, then
drum kit instruments are
played instead of
percussion group
instruments.
You cannot move the
cursor by striking pads in
the TD-10’s Percussion
Group Instrument List
screen.
Bekijk gratis de handleiding van Roland TMC-6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TMC-6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4217 MB |
