Roland TMC-6 handleiding
Handleiding
Je bekijkt pagina 14 van 32
14
Example of Connections and Settings
Here is an introductory example of actual settings using the TMC-6.
Adding a Pad to a Drum Module
You can use the TMC-6 to increase the number of pads connected to a TD-10
or other sound generator.
The following describes how pads would be added if you were using a TD-10.
When you add pads to the TD-10, you can play the TD-10’s drum kit
instruments using pads connected to the TD-10’s trigger inputs, and play the
TD-10’s percussion group instruments using pads connected to the TMC-6’s
trigger inputs.
With the TD-10, you can select one of four percussion groups for each drum kit.
In the following explanation, [TD] indicates operations performed on the TD-
10, and [TMC] indicates operations on the TMC-6.
1. Make the connections as shown in the figure below.
To have rim shots sound a different tone when using the PD-80R/120,
connect the pad to TRIG 2. You cannot get rim shots if connected to any
trigger input other than TRIG 2.
fig.05-01
You can also use note
numbers for trigger inputs
not being used by the TD-
10’s drum kits (for
example tom rims). In this
case, you can make the
TD-10 settings using the
same procedure used for
the pads connected to the
TD-10’s trigger inputs.
PD-120
MIDI Cable
MIDI IN
Stereo Cable
PD-7
Stereo Cable
TD-10
Bekijk gratis de handleiding van Roland TMC-6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TMC-6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4217 MB |
