Roland S-240P handleiding
Handleiding
Je bekijkt pagina 9 van 24
9
English
Français
Connecting/Disconnecting the S-240P
WARNING
Never connect the S-240P’s DC OUTPUT plug to a connector (Speakon) on a speaker,
amplier, or other such equipment.
Connect the DC OUTPUT plug on the S-240P only to the EXT. POWER DC INPUT connector on the S-4000S or S-4000H or to the included
DC OUTPUT conversion cable. Even though the connector may have the same shape as other connectors of the type, never connect this to
connectors (Speakon) installed in speakers or amps or similar connectors.
5 Using the S-240P when it is connected to speakers will short the S-240P’s power supply output, activating the S-240P’s output short-circuit
protection circuitry.
5 Using the S-240P when it is connected to amplier will short the amplier’s power supply output, activating the amplier’s output short-
circuit protection circuitry.
For information on devices you can connect to the S-240P, check the following Roland website.
http://proav.roland.com
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
Connecting to an S-4000S/S-4000H
Connect the DC OUTPUT plug on the S-240P to the S-4000S or S-4000H.
Connecting
1. Connect the DC OUTPUT plug to the EXT. POWER DC
INPUT on the S-4000S or S-4000H.
2. Rotate the DC OUTPUT plug clockwise until a distinct
click is heard.
Disconnecting
1. Pull and continue to hold out the DC OUTPUT plug’s lock
switch while rotating the plug counterclockwise.
Lock switch
2. Disconnect the DC OUTPUT plug from the EXT. POWER DC
INPUT on the S-4000S or S-4000H.
Bekijk gratis de handleiding van Roland S-240P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | S-240P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3511 MB |
