Roland S-0808 handleiding
Handleiding
Je bekijkt pagina 29 van 36
29
Appendices
fig.spec-sheet.eps
* 0dBu = 0.775Vms
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
* When a REAC Splitter or a switching hub is used in-line with REAC cables, the network latency will increase the amount of processing delay
introduced by the splitting device itself. The actual delay is dependant upon the specifications of the splitting device, though the maximum
delay amount for a single splitting device should be around 200 microseconds.
* This is the operating time when +48 V phantom power is supplied from all INPUT channels.
* Operating times may vary depending on ambient temperature, the current consumption of the device receiving +48 V phantom power, and
other usage conditions.
* If the battery charge runs out and S-0808’s power source is switched to REAC EMBEDDED POWER, output audio might be muted for few
seconds.
Main Specifications
Operating Time with Battery
PROCESSING
AD/DA Conversion Sampling Frequency : 96kHz, 48kHz, 44.1kHz
Signal Processing : 24 bit
Number of Channels 8 in / 8 out
CONNECTORS
DC IN XLR 4 pin type x 1 (DC 12V - 18V)
REAC RJ-45, Ethercon type x 1
Analog Output XLR 3 pin type x 8 (Balanced)
Analog Input
(Balanced,
Phantom Power)
INPUT 1 - 8 : XLR 3 pin type x 8
INPUT 5 - 8 : TRS standard type x 4
* TRS takes priority if XLR and TRS are simultaneously input to 5-8.
* INPUT 7/8 with Hi-Z switch (unbalanced when Hi-Z is turned on)
REMOTE RS-232C (D-Sub 9 pin type) x 1
INPUT / OUTPUT CHARACTERISTICS
Total Harmonic Distortion + Noise
0.04% or less (PAD:On, Input Gain:+4dBu, typ.)
Frequency Response -2dB / +0dB (@+4dBu, 20Hz - 20kHz)
Dynamic Range 110dB
Cross Talk -80dB or less (Input Gain:+4dBu, typ.)
Nominal Input Level -65 to -10dBu (PAD : Off)
-45 to +10dBu (PAD : On)
(1dB step, Max +28dBu)
PAD 20dB On/Off
Nominal Output Level +4dBu (Max +22dBu)
Input Impedance 7k ohms
Recommended Load Impedance 10k ohms or greater
Residual Noise Level
(IHF-A, typ.)
-80dBu or less
Equivalent Input Noise Level
(E.I.N.)
-128dB
OTHERS
Network Latency
375 microseconds (AD - REAC - DA latency : about 1.2ms)
REAC EMBEDDED POWER or
External Battery (DC 12V - 18V)
Power Consumption 26W (at DC 12V)
Phantom Power +48V / Max14mA (INPUT 1 - 8)
Dimensions/Weight
220(W) x 176(D) x 156.6(H) mm, 2.9 kg
8-11/16(W) x 6-15/16(D) x 6-3/16(H) inches, 6 lbs 7oz
Accessories
Battery Plate Holder and Fastening Screws (8 pcs),
REAC Connector Cover, Ferrite Core (2 pcs),
Bottom Panel Fastening Screws (4 pcs), Owner's Manual
Power Supply
Operation Temperature 0 to +40 degrees Celsius, +32 to +104 degrees Fahrenheit
IDX ENDURA-7
IDX ENDURA-10
Approx 3.5 hours Approx 4.5 hours
Bekijk gratis de handleiding van Roland S-0808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | S-0808 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5626 MB |
