Roland MC-707 handleiding
Handleiding
Je bekijkt pagina 7 van 21
MC-707 Update – Functions Added in Ver.1.71
77
Added Functions to the SCATTER
The following parameters were added to the PAD settings screens.
Parameter Value Explanation
PAN GLD -16–0–+16
The pan position moves in a L–R or R–L direction,
beginning in the PAN parameter position. This setting
determines how many times it moves. When PAN = 0
(center), the pan position moves smoothly as follows.
Pan Glide +1: from center to full right;
Pan Glide +2: from center to full right to center;
Pan Glide +3: from center to full right to center to full left.
QUANTIZE
OFF Quantization is not used.
1–16
Quantization is applied at intervals equal to the number
of steps set. The timing at which you play or release
the pads, as well as how long you press the pads for is
adjusted to correspond with the quantize range you set.
By playing the pads a little ahead of the beat, you can
make SCATTER turn on at the correct timing and length.
When Split is “1/16” and Quantize is “4”
9 10 11 12 13 14 15 16
Playing/releasing
the pads
Scatter on/o range
When Split is “1/16” and Quantize is “5”
6 7 8 9 10 11 12 13
Playing/releasing
the pads
Scatter on/o range
14
15
The following settings were added to the Grain parameter in the PAD
settings screen.
Parameter Value Explanation
GRAIN Random1–16
Plays back the grain at random.
The grain used for playback is selected at random,
according to the setting.
For example, the “Random4” setting makes the
grains that fall on the downbeat play back at
random. Set this to match the phrase.
Random1: 1–16
Random2: 1, 3, 5, 7, 9, 11, 13, 15
Random3: 1, 4, 7, 10, 13, 16
Random4: 1, 5, 9, 13
:
Random8: 1, 9
* When SIZE or HOLD exceed a value of “1”, the grain
does not change while the pad is held down.
Added Function to the Metronome Position
The following parameter was added to the Metronome Position in
SYSTEM SETTING (CTRL tab).
Value Explanation
POST T-FX
Outputs the metronome after the total eect.
(Sound is output to both MIXOUT and the headphones.)
* To output the metronome sound via USB, select “PRE T-FX” or “POST
T-FX”.
Added Shortcuts
Action Operation
Recall the rst scene
Hold down the [FUNC] button and press the [START/STOP]
button
Problems and Functions Corrected
¹
The issue with uneven timing when synchronizing an eect with the MIDI
clock of an external device has been xed.
¹
The issue with the LFO gradually going out of sync when the tone
parameter LFO’s “TEMPO SYNC SW” setting is “ON” has been xed.
¹
The issue with sound getting cut o when switching to a dierent clip in
the clip chain has been xed.
¹
The issue with the Looper track playing back the wrong clip after Looper
Optimize is executed has been xed.
¹
The issue with the buer becoming full when large amounts of data were
received via the MIDI IN connector has been xed.
¹
The issue with the pads sounding only single notes when struck at a
certain timing when the pad CHORD mode is set to arpeggiator: ON has
been xed.
¹
Other minor issues have been resolved.
Bekijk gratis de handleiding van Roland MC-707, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | MC-707 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4073 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 2100 g |
| Breedte | 426 mm |
| Diepte | 263 mm |
