Roland MC-707 handleiding
Handleiding
Je bekijkt pagina 6 van 21
MC-707 Update – Functions Added in Ver.1.71
66
Functions Added in Ver.1.71
Scene Chain Function Added
You can now chain scenes together and play them back.
This feature plays back scenes in order from scene 1-1 to the numbers
that follow. (1-1
Ó
1-2
Ó
1-3
Ó
...)
MEMOMEMO
When using the scene chain function, we recommend that you set “Call Scene”
to “TYPE2”. (UTILITY>SET>CTRL tab>Call Scene)
Chaining and playing back scenes
1.
Press the [MUTE] button to switch the PAD MODE to MUTE
mode.
2.
Hold down the [SHIFT] button and press a step button.
The SCENE CHAIN screen appears.
Controller Parameter Value Explanation
C1 CHAIN OFF, ON Switches the scene chain on/o.
C4 LENGTH OFF–127
Sets how long it takes before the scene changes.
This sets how many master clocks occur before
switching to the next scene.
VALUE - -
Selects the scene to edit.
Use the step buttons and SCENE [1]–[4] buttons to
switch between scenes and select the scene you
want to edit.
Count-In Function Added
The following parameter was added to the SYSTEM SETTING (CTRL
tab).
Parameter Value Explanation
Count-In Step OFF, 1–128
Sets the count-in. When this is on, a count-in plays
before recording begins, and the count-in length is
set to the number of steps you specify. The output
destination for the count-in is the same as for the
metronome.
When this is set to a number from 1 to 128, the
metronome sounds during count-in, regardless of the
metronome’s on/o setting.
Added Functions to the Chord Designer
The following parameters were added to the Chord Designer.
Press the cursor [>] button on the CHORD DESIGNER screen to display
the settings screen.
Parameter Value Explanation
TARGET
PAD Writes the chord to the pad you select.
ALL (KEY)
Generates chords ascending chromatically in parallel from a
single chord.
This writes a chord to each pad by changing the KEY setting
for each, based on the parameter you set.
ALL (ROOT)
Generates chords that ascend along the notes of the scale.
This writes a chord to each pad by changing the ROOT
setting for each, based on the parameter you set.
Added Function to the Audio Insert
The following settings were added to Audio Insert in the TRACK
SETTING (GENERAL tab).
Value Explanation
TRACK1–7
Inserts the selected track as a stereo signal before the MFX.
* You can insert a track whose number is less than the track that’s set.
* You can’t insert a track at track 1.
* Lower the faders for tracks containing inserted audio that are not
outputted.
* To congure MFX that dier for each clip in the audio insert’s track, set
“Sound Src” to “CLIP”.
Added Function to the Looper Track
The following parameter was added to TRACK SETTING (GENERAL tab)
for looper tracks.
Parameter Value Explanation
BPM Sync OFF, ON
When this is set to ON, the playback speed for the
phrase changes according to the BPM.
Set this to OFF if you don’t want the playback speed to
change.
Delay/Reverb Send Added to EXT IN and PC IN
An INPUT DLY/REV tab was added to INPUT/OUTPUT/REC SETTING,
along with the following parameters.
You can add delay or reverb to the input signal from EXT IN.
Parameter Value Explanation
IN DLY SEND
(EXT IN DELAY SEND)
0–255 Adjusts the amount sent to the total eect delay.
IN REV SEND
(EXT IN REVERB SEND)
0–255 Adjusts the amount sent to the total eect reverb.
The following parameters were added to PROJECT SETTING (PC IN tab).
You can add delay or reverb to the input signal from PC IN.
Parameter Value Explanation
PC Delay Send 0–255 Adjusts the amount sent to the total eect delay.
PC Reverb Send 0–255 Adjusts the amount sent to the total eect reverb.
Bekijk gratis de handleiding van Roland MC-707, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | MC-707 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4073 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 2100 g |
| Breedte | 426 mm |
| Diepte | 263 mm |
