Roland MC-101 handleiding
Handleiding
Je bekijkt pagina 2 van 21
MC-101 Update – Functions Added in Ver.1.80
22
OSC
(PCM-SYNC)
Parameter Value Explanation
WAV
(PCM-Sync: SYNC WAV)
Species the wave that is used when OSC TYPE is PCM-Sync.
OSC
(SuperSAW)
Parameter Value Explanation
DET
(SuperSAW: DETUNE)
0–127
Species the width of pitch variance
between the seven sawtooth waves that are
layered within one oscillator.
Higher values produce greater pitch
variance. (When doing this, OSC Detune
changes the pitch for each of the seven
sawtooth waves by the same width.)
OSC MOD 1-2/3-4
(Structure)
Structure lets you play two partials as a pair.
By using partial 1 or 3 (the carrier) to modulate the other partial 2 or
4 (the modulator), you can create a wide range of tonal characters.
Parameter Value Explanation
STR
(STRUCTURE)
Partial 2 or 4 is used to modulate the sound of partial 1 or 3.
OFF O
SYNC
This implements the oscillator sync function
that is provided by analog synthesizers.
The oscillator of partial 1 or 3 is reset at
pitch cycles of partial 2 or 4.
* This is only enabled when the OSC TYPE of
OSC1 or OSC3 is “VA” or “PCM-Sync”.
RING
This implements the ring modulator that is
provided by analog synthesizers.
The output of partial 2 or 4 is multiplied
with partial 1 or 3.
XMOD
XMOD2
This implements the cross modulation
function that is provided by analog
synthesizers.
The output of partial 2 or 4 is applied as the
pitch of partial 1 or 3.
LV1/3
(OSC1/3 LEVEL)
0–127 Adjusts the volume of OSC 1 or 3.
LV2/4
(OSC2/4 LEVEL)
0–127 Adjusts the volume of OSC 2 or 4.
RNG
(RING LEVEL)
0–127 Adjusts the volume of ring modulation.
MOD
(MOD DEPTH)
0–10800 [cent]
(XMOD)
0–127
(XMOD2)
Adjusts the depth of cross modulation.
FILTER
Here you can make lter settings.
Parameter Value Explanation
TYP
(TVF: FILTER TYPE)
OFF, LPF, BPF, HPF,
PKG, LPF2, LPF3
Selects the type of TVF lter when FILTER
TYPE is TVF.
OFF: O
LPF: Low pass lter
BPF: Band pass lter
HPF: High pass lter
PKG: Peaking lter
LPF2: Low pass lter 2
LPF3: Low pass lter 3
TYP
(VCF: FILTER TYPE)
FLAT, TYPE-JP,
TYPE-M, TYPE-P
Selects the type of VCF lter when FILTER
TYPE is VCF.
Each of these simulates the operation of an
analog synthesizer’s LPF.
CUT
(CUTOFF) 0–1023
Selects the frequency at which the lter
begins to have an eect on the waveform’s
frequency components.
Parameter Value Explanation
RES
(RESONANCE) 0–1023
Boosts the region of the sound near the
cuto frequency, adding a distinctive
character to the sound.
ENV
(ENV DEPTH) -63–+63 Species the depth of the lter envelope.
TVF/VCF
(FILTER TYPE)
TVF, VCF
Select either TVF or VCF as the lter type.
* TVF stands for Time Variant Filter, and is a lter
that allows detailed settings to be made for the
time-varying change in the sound’s frequency
components.
If VCF is selected, the simultaneous
polyphony will be less than when TVF is
selected.
KF
(KEY FOLLOW)
-200–+200
Set this if you want the cuto frequency to
change according to the keyboard position
of the note you play.
SLP
(FILTER SLOPE)
-12, -18, -24 [dB/
Oct]
This button selects the slope (steepness) of
the lter.
For VCF, you can choose -12, -18, or -24.
For TVF, you can choose only -12 or -24.
If the lter TYPE is TVF, the following
limitations apply.
Only -12 dB or -24 dB can be specied.
Even if you specify -18 dB, the sound engine
operates internally with the -12 dB setting.
If you specify -24 dB, the simultaneous
polyphony will be less than when -12 dB is
selected.
HPF
(HPF CUTOFF)
0–1023
Species the cuto frequency of the -6 dB
high-pass lter.
* This parameter is eective when FILTER TYPE is
VC F.
ENV FILTER
Here you can make lter envelope settings.
Parameter Value Explanation
T1A
(T1 ATTACK)
0–1023
Species the time over which the initial
value changes to the maximum value after
the key is pressed.
T3D
(T3 DECAY)
0–1023
Species the time over which the SUSTAIN
value is reached following the ATTACK.
L3S
(L3 SUSTAIN)
0–1023
Species the sustain value of the lter
envelope.
T4R
(T4 RELEASE)
0–1023
Species the time over which the minimum
value is reached after the key is released.
ENV AMP
Here you can make amp envelope settings.
Parameter Value Explanation
T1A
(T1 ATTACK)
0–1023
Species the time over which the initial
value changes to the maximum value after
the key is pressed.
T3D
(T3 DECAY)
0–1023
Species the time over which the SUSTAIN
value is reached following the ATTACK.
L3S
(L3 SUSTAIN)
0–1023
Species the sustain value of the amp
envelope.
T4R
(T4 RELEASE)
0–1023
Species the time over which the minimum
value is reached after the key is released.
ENV PITCH
Here you can make pitch envelope settings.
Parameter Value Explanation
DEP
(DEPTH)
-100–+100
Species the depth of the pitch envelope.
Higher values make the pitch envelope
produce greater change. Negative “-” values
invert the shape of the envelope.
If the OSC TYPE is other than VA, this is
limited to ±63.
Bekijk gratis de handleiding van Roland MC-101, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | MC-101 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3816 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 716 g |
| Breedte | 224 mm |
| Diepte | 132 mm |
